Dell SK Hynix Solid State Drive Firmware 10108L00/A01 Download

Posted at April 28, 2024 by PCI-DB Team

Install Driver Automatically

Device Name	Dell SK Hynix Solid State Drive Firmware 10108L00/A01
Category	Hdd Ssd Nas Usb Flash
Manufacturer	SK HYNIX
File Size	2.8 MB
Supported OS	Windows 7 ,Windows 8

Dell SK Hynix Solid State Drive Firmware 10108L00/A01 Description

This package provides the firmware for the SK Hynix SH920 family of solid state drives, Revision 10108L00, and is supported on Precision, Optiplex, Latitude, XPS, Alienware and Inspiron models.

Fixes & Enhancements

- An error that causes the SSD take longer time to boot

Applies to:
SK hynix SH920-mSATA 128GB
SK hynix SH920-mSATA 256GB
SK hynix SH920-mSATA 32GB
SK hynix SH920-mSATA 64GB
SK hynix SH920-STD 2.5 inch 128GB
SK hynix SH920-STD 2.5 inch 256GB
SK hynix SH920-STD 2.5 inch 512GB

ATTENTION

1. Backup the SSD.
2. Switch to AC Power

Firmware upgrade through the Windows utility

Procedure
1. Go to the directory containing the download package as noted above.
2. Run the firmware update utility with administrator privilege (right-click on the executable, then select "Run as administrator").
3. Follow the on-screen instructions.
4. Select the target SSD for firmware upgrade.
5. Click on "FW Update" button.
6. Follow the on-screen instructions.
7. DO NOT interrupt the firmware update. A dialog box will pop up when the firmware update is completed.
8. Please reboot your system.

About SSD Firmware:

Changing the solid-state drive (SSD) firmware version can bring about a wide variety of changes such as stability improvements for different sleep states, power consumption enhancements, increased read/write speeds, optimized compatibility with various systems, and many others.

However, performing this step is very risky because it can damage the SSD’s software in the event of an update failure. Therefore, make sure you consider changing the firmware only when and if the new version includes changes that you can make use of.

As for the installation method, given the huge number of SSD manufacturers and the wide variety of solid-state drives, it’s recommended that you carefully read and understand the update guide, and initiate the upgrade only when you have completely familiarized yourself with the steps.

In addition to that, most SSD manufacturers also require additional software that will help you apply a new firmware using a specific method – so make sure you have everything you need for a complete and successful upgrade.

Another aspect you should keep in mind is that this task must be performed in a steady power environment, such as the one provided by a UPS unit. Don’t forget to reboot the system so that the newly made changes can take effect.

That being said, if this release includes the changes you need / desire, click the download button and get the firmware file. If not, check with our website constantly in order to find out first when a suitable update becomes available. 

  It is highly recommended to always use the most recent driver version available.

Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.

Related SK HYNIX Drivers