PCI-DB.com
  1. Driver
  2. Firmware
  3. Dell Alienware Area-51 ALX Seagate Firmware DEM4 for Windows 7 x64

Dell Alienware Area-51 ALX Seagate Firmware DEM4 for Windows 7 x64 Download

Posted at November 23, 2024 by PCI-DB Team

Install Driver Automatically
Device NameDell Alienware Area-51 ALX Seagate Firmware DEM4 for Windows 7 x64
CategoryFirmware
ManufacturerSeagate
File Size8.6 MB
Supported OSWindows 7 64 bit

Dell Alienware Area-51 ALX Seagate Firmware DEM4 for Windows 7 x64 Description

Specifications:

Processor and System Chipset
- Processor Intel Core i7
- L2 cache 256 KB
- L3 cache up to 8 MB
- Bus clock 133 MHz
- System chipset Intel X58 Express DRAM bus width 64 bits
- Data bus bandwidth up to 6.4 GT/s
- Processor data width 64 bits
- BIOS chip (NVRAM) 32 Mb
- RAID support (internal SATA drives only)
- RAID 0
- RAID 1
- RAID 5
- RAID 10

Memory
- Connectors: three internally-accessible DIMM sockets
- Capacities 2 GB and 4 GB
- Memory types 1066 MHz DDR3, 1333 MHz DDR3, and 1600 MHz XMP
- Minimum 6 GB
- Maximum 12 GB

Back Panel Connectors
- IEEE 1394 one 6-pin serial connector
- Network adapter: two 10/100/1000 Mbps RJ45 connectors
- USB: six 4-pin USB 2.0-compliant connectors
- eSATA: one 4-pin eSATA connector
- S/PDIF: one optical and one coaxial output connector
- PS/2: two 6-pin PS/2 connectors
- Audio: 7.1 channel line output, stereo microphone and stereo line in connectors
- Expansion slots: eight full-height expansion slot openings to six physical expansion slot connectors on the system board

Top Panel Connectors
- IEEE 1394: one 6-pin serial connector
- USB: three 4-pin USB 2.0-compliant connectors
- eSATA one 4-pin eSATA connector
- Audio stereo headphone and microphone connectors

Communications
- Network adapter 10/100/1000 Mbps Ethernet LAN on system board
- Wireless Bluetooth wireless technology, WiFi (optional)

Video type: three PCI Express x16 connectors for full-length add-in graphics card(s)

Audio type: integrated 7.1 channel, High Definition Audio with S/PDIF support, Realtek ALC888 codec

Expansion Bus
- 1x124-pin PCI connector
- 2x36-pin PCI Express x1 connector
- 3x164-pin PCI Express x16 connector

Drives
- Externally accessible: three 5.25-inch drive bays for Blu-ray Disc combo, Blu-ray Disc Writer, DVD+/-RW, or DVD Combo; one 3.5-inch drive bay for Media Card Reader
- Internally accessible: six 3.5-inch drive bays for SATA-II hard drives

Power
- Wattage: 1000 W or 1100 W
- Voltage: 100-240 V AC, 50-60 Hz

Dimensions
- Width 249 mm (9.8 inches)
- Depth 635 mm (25 inches)
- Height: with top vents closed 557.6 mm (22 inches), with top vents open 595.5 mm (23.4 inches)
- Weight (starting at) 31.7 kg (70 lb)

  It is highly recommended to always use the most recent driver version available.

Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.

Related Seagate Drivers

Seagate SATA HDD Firmware HP2A Rev.A

Device Type: Firmware File Size: 4.4 MB Windows All

Install Driver

HP Seagate Cheetah SAS Hard Drive Firmware HPS4 Rev.A

Device Type: Firmware File Size: 1.3 MB Windows XP ,Windows Vista ,Windows XP 64 bit ,Windows Vista 64 bit

Install Driver

Find Missing Drivers

© 2024 PCI-DB.com - PCI Database Replacement. All rights reserved.