ZyXEL XGS3700-24 Switch Firmware 4.10(AAGC.5)C0 Download

Posted at December 31, 2024 by PCI-DB Team

Install Driver Automatically

Device Name	ZyXEL XGS3700-24 Switch Firmware 4.10(AAGC.5)C0
Category	Router Switch Access Point
Manufacturer	Zyxel
File Size	5.4 MB
Supported OS	OS Independent

ZyXEL XGS3700-24 Switch Firmware 4.10(AAGC.5)C0 Description

Fixes:
- ZyXEL One Network (ZON)
- ZyXEL Neighbor Management
- Web support : LLDP, LLDP-MED, Tech-support, Err-disable status, CPU utilization, Memory Utilization
- Power off and power on the device during system reboot process, all port will be inactive in show running.
- ARP packet send back to incoming port, makes CISCO switch have a MAC Flapping log.
- In spanning tree and static trunk environment, the host’s mac will be learned to wrong port.
- Send two LLDP packets (with system description length = 255) to an LLDP enabled port will cause DUT crash.
- User can’t be authorized when privilege of account is Cisco attribute and privilege level is 15.
- LLDP-MED doesn’t work with some IP phones.
- When checksum of firmware image 1 is error, switch does not change to image 2.
- Use Web to configure MLD snooping leave mode per port, immediate mode and Fast mode are inconsistent between CLI and WEB.
- If subtype of remote Port ID is mac-address. It can’t be showed on LLDP remote device information.
- When enable trunk and group two or more ports, and then just link up one of these ports, DUT sends out those LLDP packets which is in the trunk group from the link-up port.
- When we use ipv6 link-local URL to access the switch web UI on windows XP, pages with indirect URL are inaccessible. User cannot access the error.html when configuration is wrong.
- When enabled IGMP snooping, IGMP general query received by DUT will be replaced with its own source mac.
- Fix IGMP snooping group-specific queries(GSQ) with source MAC address 00: 00: 00: 00: 00: 00.
- Set MIB traceroute IP address entry, the IP address could not set successfully.
- DUT will crash when the “no multi-login” command is issued when multiple users login.

  It is highly recommended to always use the most recent driver version available.

Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.

Related Zyxel Drivers