Engenius ESR750H Router Firmware 1.3.0 Download

Posted at December 22, 2024 by PCI-DB Team

Engenius ESR750H Router Firmware 1.3.0 Description

Specifications:

Hardware Specifications
- Physical Interface
- Antenna Connector
- Power Switch
- Power Jack
- Gigabit LAN Ports
- Gigabit WAN Port
- USB Sharing Port
LED’s Status
- WPS (Press 1-to 5 seconds to activate the router’s Wi-Fi
- Protected Setup (WPS) feature.
- (Press 6-to-10 seconds to reboot the router)
- (Press up to 20 seconds to reset the router to factory
- default)
- Power Status
WLAN
- Wired and Wireless Connection

RF SPECIFICATIONS
Frequency Band
- .400~2.484 GHz (11b/11g/11n) and 5GHz (11a/11n)
Modulation Technology
- OFDM: BPSK, QPSK, 16-QAM, 64-QAM
- BPSK, DQPSK, CCK
Operation Channels
- 11 for North America, 13 for Europe, 14 for Japan
Receive Sensitivity
(Optimal) -90 dBm
Available Transmit
Power (Optimal) 20dBm
Antennas
- Detachable external 5 dBi antennas and 3 internal 3.5dBi antennas
Firewall
- Block ICMP
SPI (Static Packet Inspection)
- DoS Attack Blocking
- Rule Based (IP Address Ranges, Port Ranges & Schedule)
- DMZ (Demilitarized Zone) Host Support
VPN
- L2TP & PPTP VPN tunneling
- VPN pass-through (PPTP, L2TP, IPSEC)
Wireless Security
- WPA
- WPA2
- .1x Authenticator
- Hide SSID in beacons
- WPS
- Auto Channel Selection
- QoS WMM

  It is highly recommended to always use the most recent driver version available.

Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.

Related EnGenius Drivers