EnGenius ESR1221 EXT Router Firmware 1.07.04 Download

Posted at April 29, 2024 by PCI-DB Team

EnGenius ESR1221 EXT Router Firmware 1.07.04 Description

Specification

RF Specification:
- Frequency Band 2.400–2.484 GHz
- Modulation Technology OFDM: BPSK, QPSK, 16-QAM, 64-QAM
- DBPSK, DQPSK, CCK
- Operation Channels 11 for North America
- Receive Sensitivity(Typical)
11g:
 -85dBm @ 6Mbps
 -68dBm @ 54Mbps
11b:
 -90dBm @ 1Mbps
-84dBm @ 11Mbps
- Available Transmit Power
- 2.412~2.472G (IEEE 802.11g) Up to 17 dBm @6 ~ 54Mbps
- 2.412~2.472G (IEEE 802.11b)     Up to 23 dBm @1~11Mbps

Antenna

-1 Detachable (RP-SMA), Peak Gain=2 dbi

Software Specification:

Topology Infrastructure
Operation Mode AP / Router / WDS / Universal Repeater
LAN
- DHCP Server
- Static Routing Table
- UPNP
- Spanning Tree

WAN
- PPTP
- PPPoE
- Static IP
- DHCP Client
- Clone MAC

Router
- NAT/ NAPT
- Port Forwarding
- DDNS
- Time Zone(NTP client)

Firewall
- Blocking Ping
- DoS(Blocking Ping, Port scan, Sync Flood)
- MAC / IP Filtering
- DMZ (Demilitarized Zone) Host
- Policy Based Parental Controls
- Port Filtering
- Web Filtering
- MAC Filtering
- IP Filtering
- VPN VPN pass-through (PPTP & IPSEC)

Wireless
- 64/128 bit WEP Encryption
- WPA Personal (WPA-PSK using TKIP or AES)
- WPA Enterprise (WPA-EAP using TKIP)
- 802.1x Authenticator
- Hide SSID / beacons
- User Isolation
- RF Power Control
- QoS
- Best channel selection

Management:

ConfigurationWeb-based configuration (HTTP)
Firmware Upgrade
- Via webpage upgrade
- Auto recovery once firmware upgrade fail

Administrator
-

Setting Administrator password change
- Idle time out

Reset

Setting
- Reboot
- Reset to Factory Default
- Backup Settings

Install wizard

- Device act as AP/Router mode
- Device act as Repeater mode

 System Log
- Log important System messages

Environment & Physical:
Temperature
-Operating: 0°C to 45°C (32°F to 113°F)
- Storage: -10°C to 70°C (14°F to 158°F)
Humidity
-(non-condensing) 5% – 95% typical

  It is highly recommended to always use the most recent driver version available.

Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.

Related EnGenius Drivers