EnGenius EOC5611P Access Point Firmware 1.3.3 Download

Posted at December 22, 2024 by PCI-DB Team

EnGenius EOC5611P Access Point Firmware 1.3.3 Description

802.11a/g Outdoor High Power 500mW Bridge / Access Point with Dual Antenna Polarity & Dual Antennas

802.11a/g Outdoor High Power 500mW Bridge / Access Point with Dual Antenna Polarity & Dual Antennas

ANTENNA SPECIFICATIONS:
Internal: Directional Panel Antenna; Peak Gain 14dBi
Frequency Band: 5.1-5.8GHz
Horizontal -3dB Bandwidth: 35°
Vertical -3dB Bandwidth: 15°
Antenna Polarity: Dual-Polarized; Vertical/Horizontal
Polarity Selection: Software Controlled
External: RP-SMA Female Type x2 (2.4GHz)*
*The external antenna is not included in the package. User needs to decide the antenna gain before making purchase.

HARDWARE SPECIFICATIONS:
MCU/RF: Atheros AR2313 + AR5112
Memory: 32MB SDRAM
Flash: 8MB
Physical Interface:
One 10/100 Fast Ethernet RJ-45
Reset Button
Antenna Switch (Internal & External)
RP-SMA Connector x2 (2.4GHz & 5GHz)
LED Indicators:
Power (Status)
LAN (10/100Mbps)
WLAN (Wireless Activity)
Link Quality x3 (Client Bridge mode)
Green: Excellent Quality / Yellow: Good Quality / Red: Poor Quality
Power Requirements:
Active Ethernet: (Power-over-Ethernet) Proprietary PoE Design
Power Adapter: 24V/1A DC
Regulation Certifications: FCC Part 15C/15B/15E, EN301 893, EN 300 328, EN 301 489-1/-17, EN60950, IC
* RSSI indication is only in client bridge mode.

RF SPECIFICATIONS:
Frequency Band:
802.11a: 5.150~5.350GHz, 5.470~5.725GHz, 5.725~5.825GHz
802.11b/g: 2.412~2.472GHz
Modulation Technology: OFDM : BPSK, QPSK, 16-QAM, 64-QAM, DSSS: DBPSK, DQPSK, CCK
Operation Channels:
802.11a: 21 for North America
802.11b/g: 11 for North America, 14 for Japan, 13 for Europe
Receive Sensitivity (Typical):
IEEE 802.11a
-92dBm @ 6Mbps
-73dBm @ 54Mbps
IEEE 802.11g
-92dBm @ 6Mbps
-75dBm @ 54Mbp
IEEE 802.11b
-97dBm @ 1Mbps
-91dBm @ 11Mbps
Available Transmit Power (Average):
IEEE 802.11a
26dBm @ 6~24Mbps
24dBm @ 36Mbps
22dBm @ 48Mbps
20dBm @ 54Mbps
IEEE 802.11g
26dBm @ 6~24Mbps
24dBm @ 36Mbps
23dBm @ 48Mbps
22dBm @ 54Mbps
IEEE 802.11b
27dBm @ 1~11Mbps

SOFTWARE FEATURES:
Topology: Infrastructure
Protocol / Standard: 802.3 (Ethernet) / 802.3u (Fast Ethernet) / 802.11a (5GHz WLAN) / 802.11b/g (2.4GHz WLAN)
Operation Mode: Access Point / Client Bridge / Client Router / WDS
LAN: DHCP Server / DHCP Client
VPN: VPN pass-through
Wireless:
Channel Selection (Setting varies by countries)
Transmission Rate: 54, 48, 36, 24, 18, 12, 11, 9, 6, 5.5, 2, 1 in Mbps
Long Distance Transmission: 1km to 30km (ACK Timeout)
Auto Channel Selection
Traffic Shaping
Transmit Power Table
AP Detection
Narrow Bandwidth 5/10/20MHz Support
Signal Strength LED Indicators (3 colors)
PPPoE & PPtP (Client Router mode)
Preferred SSID
Mutiple SSID Support (up to 4)(Access Point mode)
802.1q VLAN Tagging Support
Security:
WEP Encryption 64/128/152bits
WPA/WPA2 Personal (WPA-PSK using TKIP or AES)
WPA/WPA2 Enterprise (WPA-EAP using TKIP)
802.1x Authenticator
Layer 2 Isolation
Hide SSID in Beacons
MAC Address Filtering (up to 50)
Wireless STA (Client) Connected List
QoS: WMM

MANAGEMENT:
Configuration: Web-Based Configuration (HTTP)
Firmware Upgrade: Upgrade Firmware via Web Browser / Keep Latest Setting When Firmware Update
Administrator Setting: Administrator Password Change
Reset Setting: Reboot (Press 1 second) / Reset to Factory Default (Press 5 seconds)
System Monitoring: Status, Event Log
SNMP: v1, v2c
MIB: MIB I, MIB II (RFC1213)
Backup & Restore: Settings Through Web
Time Setting: NTP (Auto Setting) / Manual Change

ENVIRONMENT & PHYSICAL:
Temperature Range: Operation -20°C to 70°C (-4°F to 158°F) / Storage -30°C to 80°C (-22°F to 176°F)
Humidity (Non-condensing): 0% ~ 95% Typical
Dimensions: L: 10.24” (260mm) x W: 3.31” (84mm) x H: 2.17” (55mm)
Weight: 0.66lb. (300g)

  It is highly recommended to always use the most recent driver version available.

Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.

Related EnGenius Drivers