D-Link DIR-825 (rev.A) Router Firmware 1.11 Download

Posted at December 25, 2024 by PCI-DB Team

D-Link DIR-825 (rev.A) Router Firmware 1.11 Description

Fixes:

- Added CAPTCHA (Cryptographic Authentication)
- Added Advanced DNS and help description
- Added back "11b" on GUI.
- New SharePort support PC/Mac (Requires New Utility Installed on PC or Mac to work)
- Fixed Port Forwarding rule issue,if set more than 8 UDP or TCP port, it will show Warning message.
- Fixed if set more than 8 Trigger or Firewall port in Application Rules, it will show Warning message.
- Fixed bug: When QRS set wan type of rt to DHCP, the rt will not set Primary and Second DNS.
- Firmware cannot be downgraded to previous versions.
- Remove 3G feature (not a supported feature by North America ISP)
- Fixed PPTP and L2TP Set "Manual" connect mode issue.
- Change to "Manual" and "Maximum Idle Time" becomes gray,but still "1" minute.

NOTE:

This firmware does not allow downgrading

About Router Firmware:

Before you consider downloading this firmware, go to the system information page of the router and make sure that the currently installed version isn’t either newer or matching this release.

Due to the large variety of router models and different methods for upgrading the device, it is highly recommended that you read and, above all, understand the installation steps before you apply the new firmware, even if you are a power user.

In theory, these steps shouldn’t be much of a hassle for anyone, because manufacturers try to make them as easy as possible, even if they don’t always succeed. Basically, you must upload the new firmware to the router through its administration page and allow it to upgrade.

If you install a new version, you can expect increased security levels, different vulnerability issues to be resolved, improved overall performance and transfer speeds, enhanced compatibility with other devices, added support for newly developed technologies, as well as several other changes.

If you’re looking for certain safety measures, remember that it would be best if you perform the upload using an Ethernet cable rather than a wireless connection, which can be interrupted easily. Also, make sure you don’t power off the router or use its buttons during the installation, if you wish avoid any malfunctions.

If this firmware meets your current needs, get the desired version and apply it to your router unit; if not, check with our website as often as possible so that you don’t miss the update that will improve your device. 

  It is highly recommended to always use the most recent driver version available.

Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.

Related D-Link Drivers