EnGenius EOC-3610S-EXT Access Point Firmware 1.0.1.04 Download

Posted at December 25, 2024 by PCI-DB Team

EnGenius EOC-3610S-EXT Access Point Firmware 1.0.1.04 Description

EOC-3610S-EXT - 802.11g Outdoor High Power 600mW Access Point / Bridge with Detachable Omni Antenna & 802.3af PoE

RF SPECIFICATIONS:
Frequency Band: 2.4-2.484GHz
Media Access Protocol: Carrier Sense Multiple Access with Collision Avoidance (CSMA/CA)
Modulation Technology: Orthogonal Frequency Division Multiplexing (OFDM)
DBPSK @ 1Mbps
DQPSK @ 2Mbps
CCK @ 5.5 & 11Mbps
BPSK @ 6 & 9Mbps
QPSK @ 12 & 18Mbps
16-QAM @ 24 & 36Mbps
64-QAM @ 48 & 54Mbps
Operating Channels: 11 for North America
Receive Sensitivity (Typical):
IEEE 802.11g
6Mbps @ -91dBm
54Mbps @ -74dBm
IEEE 802.11b
11Mbps @ -90dBm
1Mbps @ -95dBm
Available Transmit Power (Typical):
IEEE 802.11g
27dBm @ 6~24Mbps
25dBm @ 36Mbps
24dBm @ 48Mbps
23dBm @ 54Mbps
IEEE 802.11b
28dBm @ 1, 2, 5.5, 11Mbps
Antenna: Detachable Omni Antenna; RP-SMA Type; Peak Gain 5dBi

SOFTWARE FEATURES:
Topology: Infrastructure / Ad-Hoc
Operation Mode: Access Point / Client Bridge / WDS
Interface:
Wireless 802.11b/g
10/100 RJ-45 Port
RS-232 Console Port
Security:
802.1x / RADIUS Client EAP-MD5/TLS/TTLS (Access Point mode)
WPA2 / WPA (PSK) with TKIP/AES
MAC Address Filtering (Access Point mode)
Hide SSID
LAN: DHCP Server / DHCP Client

MANAGEMENT:
Configuration: Web-based configuration (HTTP) / Telnet
SNMP: V1, V2c
Firmware Upgrade: Upgrade Firmware via Web Browser / RS-232 Serial Interface / TFTP

PHYSICAL:
Power Requirements:
Active Ethernet: (Power-over-Ethernet, IEEE 802.3af) 48VDC/0.375A
Power Adapter: 100/240VAC, 50/60Hz (Auto Sensing)
Dimensions: L: 163.8mm x W: 135.2mm x H: 47.0mm
Weight: 2.6lb. (1.2kg)
Temperature Range: Operation -20°C to 60°C / Storage -40°C to 80°C
Humidity (Non-condensing): 5%-95% Typical

PACKAGE CONTENTS:
EOC-3610S-EXT Outdoor Wireless Device x1
48V/0.375A AC/DC Adapter x1
Power-over-Ethernet (PoE) Inline Power Injector x1
5dBi RP-SMA Omni Antenna x1
Grounding Cable 1.8m x1
User Manual CD Disc x1
Wall/Mast Mounting Kit x1

  It is highly recommended to always use the most recent driver version available.

Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.

Related EnGenius Drivers