EnGenius EMP-8602 Wireless Module Driver 1.4 for XP Download

Posted at November 2, 2024 by PCI-DB Team

EnGenius EMP-8602 Wireless Module Driver 1.4 for XP Description

EMP-3602 - 802.11g High Power 250mW Wireless Mini-PCI Module with Atheros AR2413

GENERAL INFORMATION:
Frequency Band: 2.400-2.484GHz
Modulation Technology:
802.11g: OFDM (64-QAM, 16-QAM, QPSK, BPSK)
802.11b: DSSS (DBPSK, DQPSK, CCK)
Operating Channels: 11 for North America
Transmission Rate 802.11b/g: 1, 2, 5.5, 6, 9, 11, 12, 18, 24, 36, 48, 54 in Mbps
Form Factor: Mini-PCI TypeIIIB
Antenna Connector: U.FL x2
Standard: WECA (Wi-Fi & Wi-Fi5 Compliance) / 802.11g / 802.11b
Regulation Certification: FCC Part 15
Operating Voltage: 3.3V+0.15V
Temperature Range: Operation -20°C to 85°C / Storage: -30°C to 90°C
Humidity (Non-condensing): 5%~95% Typical
Dimensions: 59.60mm X 44.45mm
Weight: 15g (0.53oz)

RADIO FREQUENCY BAND:
Receive Sensitivity (Typical):
802.11g:
-91dBm @ 6Mbps
-73dBm @ 54Mbps
802.11b:
-96dBm @ 1Mbps
-89dBm @ 11Mbps
Available Transmit Power (Typical):
802.11g
23dBm @ 6~24Mbps
21dBm @ 36Mbps
20dBm @ 48Mbps
19dBm @ 54Mbps
802.11b
23dBm @ 1~11Mbps

CURRENT CONSUMPTION INFORMATION:
Tx Current: ≦ 550mA
Rx Current: ≦ 300mA
Card on Current: ≦ 300mA
Sleep Current: ≦ 30mA

  It is highly recommended to always use the most recent driver version available.

Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.

Related EnGenius Drivers