EnGenius EOC1650 Access Point Firmware 1.3.1 Download

Posted at April 29, 2024 by PCI-DB Team

EnGenius EOC1650 Access Point Firmware 1.3.1 Description

EOC1650 - 802.11g Outdoor 200mW Bridge / Access Point with Dual Antennas

HARDWARE SPECIFICATIONS:
MCU/RF: Atheros AR2315
Memory: 32MB SDRAM
Flash: 8MB
Physical Interface:
One 10/100 Fast Ethernet RJ-45
Reset Button
One Antenna Switch
One RP-SMA Connector
LED Indicators:
x Power (Status)
x LAN (10/100Mbps)
x WLAN (Wireless Activity)
x Link Quality (Client Bridge mode)
Green: Excellent Quality / Yellow: Good Quality / Red: Poor Quality
Power Requirements:
Active Ethernet: (Power-over-Ethernet) Proprietary PoE Design
Power Adapter: 24V/0.6A DC
Regulation Certifications: FCC Part 15C/15B, EN 300 328/EN 301 489-1/-17

RF SPECIFICATIONS:
Frequency Band: 2.412–2.472GHz
Modulation Technology: OFDM: BPSK, QPSK, 16-QAM, 64-QAM, DSSS: DBPSK, DQPSK, CCK
Operation Channels: 11 for North America
Receive Sensitivity (Typical):
IEEE 802.11g
Mbps @ -92dBm
Mbps @ -74dBm
IEEE 802.11b
Mbps @ -97dBm
Mbps @ -89dBm
Available Transmit Power (Average):
IEEE 802.11g
dBm @ 6~24Mbps
dBm @ 36Mbps
dBm @ 48Mbps
dBm @ 54Mbps
IEEE 802.11b
dBm @ 1~11Mbps
Antenna:
Internal: Directional Panel Antenna; Peak Gain 7dBi
Horizontal -3dB Bandwidth: 100°
Vertical -3dB Bandwidth: 45°
External: Detachable Omni Antenna; RP-SMA Type; Peak Gain 5dBi

SOFTWARE FEATURES:
Topology: Infrastructure
Protocol / Standard: 802.3 (Ethernet) / 802.3u (Fast Ethernet) / 802.11b/g (2.4GHz WLAN)
Operation Mode: Access Point / Client Bridge / Client Router
LAN: DHCP Server / DHCP Client
VPN: VPN pass-through
Wireless:
Channel Selection (Setting varies by countries)
Transmission Rate 802.11b/g: 54, 48, 36, 24, 18, 12, 11, 9, 6, 5.5, 2, 1 in Mbps
Long Distance Transmission: 1km to 30km
Transmit Power Table
Signal Strength LED Indicators (3 colors)
PPPoE (Client Router mode)
Security:
WEP Encryption 64/128/152bits
WPA/WPA2 Personal (WPA-PSK using TKIP or AES)
WPA/WPA2 Enterprise (WPA-EAP using TKIP)
.1x Authenticator
Hide SSID in Beacons
MAC Address Filtering (up to 50)
Wireless STA (Client) Connected List
QoS: WMM

MANAGEMENT:
Configuration: Web-Based Configuration (HTTP)
Firmware Upgrade: Upgrade Firmware via Web Browser / Keep Latest Setting When Firmware Update
Administrator Setting: Administrator Password Change
Reset Setting: Reboot (Press 1 second) / Reset to Factory Default (Press 5 seconds)
System Monitoring: Status, Event Log
SNMP: v1, v2c
MIB: MIB I, MIB II (RFC1213)
Backup & Restore: Settings Through Web
Time Setting: NTP (Auto Setting) / Manual Change

ENVIRONMENT & PHYSICAL:
Temperature Range: Operation -20°C to 70°C (-4°F to 158°F) / Storage -30°C to 80°C (-22°F to 176°F)
Humidity (Non-condensing): 0% ~ 95% Typical
Dimensions: L: 7.56” (192mm) x W: 1.89” (48mm) x H: 1.43” (36.2mm)
Weight: 0.55lb. (250g)

  It is highly recommended to always use the most recent driver version available.

Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.

Related EnGenius Drivers