NETGEAR WNDAP660 Access Point Firmware 3.0.5.0 Download

Posted at December 31, 2024 by PCI-DB Team

NETGEAR WNDAP660 Access Point Firmware 3.0.5.0 Description

New Features:

- Switch between Stand alone and Business Central(BC) mode in AP.
- Use AP local GUI BC tab "enable/disable" option to switch from standalone to BC and vice versa.
- Show AP uptime in Local GUI.

Bug Fixes:

- Excess Neighbor APs showing in BC.
- AP local GUI should enable "save as" option under Logs even if the logs are cleared.
- Fixes to Macbook Pro disconnect.
- Unable to sort the Rogue APs under the monitoring page for 5GHz radios in AP local GUI.
- WNDAP660 MIB seems corrupt/syntax error.
- Randomly drops wifi & WNDAP660 hangs after some days (Beacon stuck issue).

Known issue:

- Rogue AP table may not list all neighbor APs.
- There are known client disconnect issue with Macbook Pro running OS x v10.8.5(Mountain Lion), please upgrade to latest OS x.
- Not able to disable the DHCPv6 server when hotSpot is enabled.
- Wireless mode 11NA throughput fluctuates frequently with Mac Book and Intel 6300 wireless clients.
- Very rarely P2P Ping connection fail when the WDS Authentication is changed from Open to WPA-PSK. Reboot the AP to work around it.

About Access Point Firmware:

If you update the Access Point (AP) firmware, your device can benefit from changes that fix multiple issues encountered by wireless clients, correct different user interface problems, add various functionalities, and include support for newly developed protocols.

Before performing this task, we recommend that you read and understand all the installation steps, because there are many AP models and manufacturers available. Each producer strives to make the procedure as simple as possible, but there are cases when it’s anything but that.

It is also advisable that you apply a new access point firmware in a steady power environment (UPS unit will satisfy this need), using an Ethernet cable rather than a wireless connection. The latter can be easily interrupted.

With this in mind, if you wish to apply this version, click the download button and install the package on your access point. Remember to check back with our website as often as possible so that you don’t miss a single new release.

  It is highly recommended to always use the most recent driver version available.

Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.

Related NETGEAR Drivers