D-Link DGL-4100 rev. A Router Firmware 1.7 Download

Posted at December 24, 2024 by PCI-DB Team

D-Link DGL-4100 rev. A Router Firmware 1.7 Description

Problems Resolved:

1.PPTP/L2TP Linux crash/reboot issue resolved.
2.Radius Server NAS-IP fix.
3.UPnP port forwarding fixed to function with Sony Location Free TV.
4.UPnP function in Azureus fixed.
5.DHCP Server not providing DNS servers after ipconfig release/renew when the WAN side is connected to the SBC DSL Modem in DHCP mode is resolved.
6.Timezone and Daylight saving in Manual mode support.
7.Disable gaming rule is displayed when a rule is disabled.
8.Duplicated Inbound Filter Rules not allowed on the Inbound Filter Page.
9.RTSP ALG issue resolved.

Enhancements:

1.Rearrangement of the UI to be user friendly.
2.Pure Networks – Final HNAP Enhancements.
3.Added 2 NTP servers to drop down list –
a.ntp1.dlink.com
b.ntp.dlink.com.tw
4.Simplified the Dynamic DNS page.
5.Removed WCN ActiveX feature .

Installation Notes:

- This custom firmware can be applied like any regular update.
- You should not need to reset to factory defaults.
- You can revert back to an original ASUS firmware at any time.
- Do not load a saved copy of your settings.

About Router Firmware:

Before you consider downloading this firmware, go to the system information page of the router and make sure that the currently installed version isn't either newer or matching this release.

Due to the large variety of router models and different methods for upgrading the device, it is highly recommended that you read and, above all, understand the installation steps before you apply the new firmware, even if you are a power user.

In theory, these steps shouldn't be much of a hassle for anyone, because manufacturers try to make them as easy as possible, even if they don't always succeed. Basically, you must upload the new firmware to the router through its administration page and allow it to upgrade.

If you install a new version, you can expect increased security levels, different vulnerability issues to be resolved, improved overall performance and transfer speeds, enhanced compatibility with other devices, added support for newly developed technologies, as well as several other changes.

If you're looking for certain safety measures, remember that it would be best if you perform the upload using an Ethernet cable rather than a wireless connection, which can be interrupted easily. Also, make sure you don't power off the router or use its buttons during the installation, if you wish avoid any malfunctions.

If this firmware meets your current needs, get the desired version and apply it to your router unit; if not, check with our website as often as possible so that you don't miss the update that will improve your device.

  It is highly recommended to always use the most recent driver version available.

Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.

Related Dovado Drivers