Dovado Tiny AC Router Firmware 9.0.8 Download

Posted at November 21, 2024 by PCI-DB Team

Dovado Tiny AC Router Firmware 9.0.8 Description

Fixes & Enhancements:

- Add support for the Fibaro FGS213 Z-Wave switch.
- Solved issue connection issue with the new firmware for Netgear AC810S.
- Solved issue with traffic counter not showing correct information for values less than 1GB.
- Solved issue with global On/Off switch for Internet scheduling.
- Solved issue with Redial and restart not working correctly when using Spotboost.
- Solved issue with connection when going back to main interface in connection tracker.
- Solved issue with night mode not working between the 8 and 10 in the morning.

Mobile Hotspot devices (via USB connector):

- Netgear AirCard 800S (Optus)

Upgrade Procedure - Windows Update Utility:

1) Download the exe file with the link below.
2) Double-click the exe file to start the Firmware Utility.
3) Follow the instructions in the application to upgrade the firmware.

Upgrade Procedure - Mac OS X Update Utility:

1) Download the dmg file and double-click on it to start the Firmware Utility.
2) Click the Upgrade tab at the top.
3) Type in your router's login password (default is "password") and click the Upgrade button.
4) The upgrade takes 3 minutes.

Upgrade Procedure - Manual:

1) Download the zip file and extract it.
2) Log into the web interface of your router at 192.168.0.1.
3) Go to Upgrade->HTTP Upgrade page.
4) Browse for the .BIN file you have downloaded and extracted and then click Start HTTP Upgrade.
5) The upgrade takes 3 minutes.

About Router Firmware:

Before you consider downloading this firmware, go to the system information page of the router and make sure that the currently installed version isn't either newer or matching this release.

Due to the large variety of router models and different methods for upgrading the device, it is highly recommended that you read and, above all, understand the installation steps before you apply the new firmware, even if you are a power user.

In theory, these steps shouldn't be much of a hassle for anyone, because manufacturers try to make them as easy as possible, even if they don't always succeed. Basically, you must upload the new firmware to the router through its administration page and allow it to upgrade.

If you install a new version, you can expect increased security levels, different vulnerability issues to be resolved, improved overall performance and transfer speeds, enhanced compatibility with other devices, added support for newly developed technologies, as well as several other changes.

If you're looking for certain safety measures, remember that it would be best if you perform the upload using an Ethernet cable rather than a wireless connection, which can be interrupted easily. Also, make sure you don't power off the router or use its buttons during the installation, if you wish avoid any malfunctions.

If this firmware meets your current needs, get the desired version and apply it to your router unit; if not, check with our website as often as possible so that you don't miss the update that will improve your device.

  It is highly recommended to always use the most recent driver version available.

Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.

Related Dovado Drivers