NETGEAR WC9500 Wireless Controller Firmware 6.5.1.2 Download

Posted at December 24, 2024 by PCI-DB Team

NETGEAR WC9500 Wireless Controller Firmware 6.5.1.2 Description

NOTE:

- Controller must be upgraded to NETGEAR WC9500 Wireless Controller Firmware 5.1.0.18 before loading 6.5.1.2.

Bug Fixes:

- Support for a new Wave 2 AP, WAC740.
- WAC740 Supports 2.5G Ethernet, LAG and POE+.
- Syslog server support on Controller. Logs to external SD Card or USB.
- Turn On/Off LEDs for WAC-740/WAC730/WAC720.
- Wi-Fi environment monitoring - WAC740 can measure Channel Utilization across all channels/band & detect many interference.
- Wi-Fi sniffer/packet capture - WAC740/730/720 can do Wi-Fi sniffing and capturing.
- Console/Serial Port Message logging - OS/Kernel related messages can be logged to Syslog Server.

Known Issues:

- MU-MIMO performance will work optimally with 1x1 MU-MIMO clients.
- WAC740 AP boot up process fails, if we connect the Console cable first and then connect POE Cable.
- When WAC740 works in AirQual mode, it does not support client connectivity.
- When AP is in sniffing mode, it does not support client connectivity.
- It is advised to save radius Profiles on the Wi-Fi clients for quick connection and data path.
- Bluetooth interference might get detected as Microwave Oven and 2.4GHz digital Cordless phone interference as Bluetooth, for some of the devices.
- Do not add /manage Access Points on the secondary controller when the master is down.
- Neighbor clients page does not show neighbor clients, when only 11ac APs are managed.
- AirQual AP might take long time to detect Bluetooth interference in open environment.
- If a AP is in non-default management vlan, it will not fall back to default IP (192.168.0.160) if there are no dhcp servers.
- If Internal USB logging is enabled, please make sure you disable the internal syslog features before unmounting the USB.
- DFS channel support is unavailable on WAC740 AP.
- Multicast rate limiting is not supported in WAC740/WAC730/WAC720 AP.
- For Captive portal account name please do not use spaces in between.
- For WAC740 1Gig Ethernet port will not be enabled till LAG is enabled from AP UI/Controller UI.
- WAC740 AP Doesn't Reflects the Correct powers "af" & "at" while connected to the Switch GS752TP.
- Usage graphs issues.
- The Usage representation in graphs are not correct for more than 1Gb usage as the graphs represent as 1 K MB.
- SSID Usage graph displays wrong SSID.
- After Controller Reboot usage graph per AP and per SSID are out of synchronization.
- Monitor network page is not displaying Consolidated usage graph in stack setup.
- SSID usage graph shows old SSID usage which is not active.
- Difference seen between AP usage and SSID usage graph for respective AP's though each AP is associated to 1 SSID.

Upgrade Instructions:

- Download and extract the new software to a convenient place such as your desktop.
- Log into the WC9500
- Read the below Caveats, if the upgrade is from a lower major release
- Select Maintenance > Upgrade from the main/submenu.
- In the Firmware Upgrade section, select Local File and click Browse.
- Locate the downloaded file and click Apply.
- This will start the software upgrade to your WC9500. This may take some time. Do not interrupt the upgrade process.
- At the conclusion of the upgrade, WC9500 will reboot automatically.

About Router Firmware:

Before you consider downloading this firmware, go to the system information page of the router and make sure that the currently installed version isn’t either newer or matching this release.

Due to the large variety of router models and different methods for upgrading the device, it is highly recommended that you read and, above all, understand the installation steps before you apply the new firmware, even if you are a power user.

In theory, these steps shouldn’t be much of a hassle for anyone, because manufacturers try to make them as easy as possible, even if they don’t always succeed. Basically, you must upload the new firmware to the router through its administration page and allow it to upgrade.

If you install a new version, you can expect increased security levels, different vulnerability issues to be resolved, improved overall performance and transfer speeds, enhanced compatibility with other devices, added support for newly developed technologies, as well as several other changes.

If you’re looking for certain safety measures, remember that it would be best if you perform the upload using an Ethernet cable rather than a wireless connection, which can be interrupted easily. Also, make sure you don’t power off the router or use its buttons during the installation, if you wish avoid any malfunctions.

If this firmware meets your current needs, get the desired version and apply it to your router unit; if not, check with our website as often as possible so that you don’t miss the update that will improve your device. 

  It is highly recommended to always use the most recent driver version available.

Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.

Related NETGEAR Drivers