Ubiquiti locoM5 Access Point Firmware 6.0.30097.161219 Download

Posted at April 27, 2024 by PCI-DB Team

Ubiquiti locoM5 Access Point Firmware 6.0.30097.161219 Description

Important Note:

- Version 6.0 is recommended for PTMP Mixed mode usage (M clients connected to AC AP)

New:

- New: airMAX AC client mode support (AP must be upgraded to airOS8 and PTMP Mixed mode selected)
- New: Don't do full restart on most configuration changes
- New: Added signal per chain reporting for AirControl v2
- New: Add kernel crashlog into Support info for better troubleshooting
- New: Added Crash log reporting to Ubiquiti Networks for better troubleshooting
- New: Added "default-mru" key in ppp/options file to disable MRU negotiation
- New: Added MRU negotiation Enable/Disable option
- New: Store configuration backup if upgrade fixer is changing it
- New: Enable Block management access on WAN when switching to Router mode
- New: Dynamic DNS configuration via system.cfg
- New: Added option allowing LLDP packets to pass wireless bridge
- New: DHCP Option configuration via system.cfg
- New: Update dropbear to v2016.74
- New: OpenSSL update to v1.0.2h
- New: lighttpd update to v1.4.39
- New: Linux kernel update to v2.6.32.71

Regulatory Updates:

- ETSI EN 301 893 v1.8.1 adaptivity improvements
- Update 5GHz band for China: add 5180-5240MHz and 5260-5320MHz channels
- Revised UNII Rules activation for NanoStation M5, NanoStation Loco M5 and LiteBeam M5 23

Improvements:

- Reduce false positives and misclassifications of invalid DFS radar events
- airMAX security improvements
- MAC authentication process improvement while RADIUS server is not reachable
- Various vulnerability/security changes
- Stability improvements
- Performance issue when XM device runs out of memory

Fixes:

- Fix: Set CPU speed to 400MHz to eliminate out of band emission for Verizon (XM series)
- Fix: AP drops stations when another AP with the same SSID is running on the same frequency
- Fix: Stability fixes (random AP/Station reboots)
- Fix: RADIUS MAC Authentication fails in case server isn't reachable
- Fix: Can't SSH to Mikrotik devices
- Fix: Do not load NAT helpers modules when NAT is disabled
- Fix: DNS Proxy binds not just to LAN but to WAN port also
- Fix: MSS Clamping for PPPoE is not enabled when Management VLAN is configured
- Fix: Generate unique SSL certificate for each device
- Fix: Generate SSL certificate start date from firmware build timestamp
- Fix: Crontab does not work with multiple scheduler/commands
- Fix: AirMax Capacity reports over 100 percent with Legacy devices
- Fix: Site Survey doesn't report full list of available APs
- Fix: Show full EdgeSwitch firmware version in Device Discovery
- Fix: Device Name with not allowed symbols breaks DHCP
- Fix: Impossible to log in with SSH authorisation keys
- Fix: French language translation issue
- Fix: Change antenna reporting to Chain0/Chain1 instead of Vertical/Horizontal for all Rocket models
- Fix: Wrong TX Power reporting from command line "iwlist ath0 txpower" (XW)
- Fix: DHCPv6 doesn't after PPPoE session reinitialisation
- Fix: Revised UNII Rules activation/deactivation for products manufactured after 06/01/2016 (due to changes in the FCC rules)
- WEB UI: Updated Chinese translation
- WEB UI: More statistics on Main page (CPU/Memory usage)
- WEB UI: Added DFS Events monitoring list on the Main page
- WEB UI: Switch antenna Chain0/Chain1 mapping to Horizontal/Vertical for PowerBeams

About Router Firmware:

Before you consider downloading this firmware, go to the system information page of the router and make sure that the currently installed version isn’t either newer or matching this release.

Due to the large variety of router models and different methods for upgrading the device, it is highly recommended that you read and, above all, understand the installation steps before you apply the new firmware, even if you are a power user.

In theory, these steps shouldn’t be much of a hassle for anyone, because manufacturers try to make them as easy as possible, even if they don’t always succeed. Basically, you must upload the new firmware to the router through its administration page and allow it to upgrade.

If you install a new version, you can expect increased security levels, different vulnerability issues to be resolved, improved overall performance and transfer speeds, enhanced compatibility with other devices, added support for newly developed technologies, as well as several other changes.

If you’re looking for certain safety measures, remember that it would be best if you perform the upload using an Ethernet cable rather than a wireless connection, which can be interrupted easily. Also, make sure you don’t power off the router or use its buttons during the installation, if you wish avoid any malfunctions.

If this firmware meets your current needs, get the desired version and apply it to your router unit; if not, check with our website as often as possible so that you don’t miss the update that will improve your device.

  It is highly recommended to always use the most recent driver version available.

Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.

Related Ubiquiti Drivers