VIA Labs VL810 / VL811 Controller Utility / Firmware 0.88 Download

Posted at November 2, 2024 by PCI-DB Team

Install Driver Automatically

Device Name	VIA Labs VL810 / VL811 Controller Utility / Firmware 0.88
Category	Firmware
Manufacturer	VIA Labs
File Size	937 KB
Supported OS	Windows XP ,Windows Vista ,Windows XP 64 bit ,Windows Vista 64 bit ,Windows 7 ,Windows 7 64 bit

VIA Labs VL810 / VL811 Controller Utility / Firmware 0.88 Description

VIA Labs USB 3.0 Hub Controller Utility upgrades the firmware used by the VL810 Superspeed USB Hub Controller.

Firmware Release Note:

Release number: 0008_8

- USB 3.0:
1. Enable Function_Suspend feature.
2. Code Consolidation
3. Fixed false overcurrent message when hub firmware is updated.
4. Clear U1_timeout_val and U2_timeout_val when receiving warm reset or hot reset
5. Modify to reject power saving mode request before the hub address is assigned.
6. When a device connected to a downstream port is disconnected, the downstream port’s power saving mode will be disabled.
7. Raise LFPS detecting threshold voltage to mitigate erroneous exit caused by some devices with U3 mode noise over the allowed max value in specification.
8. Some devices connected to the 2nd tier hub will disappear after resuming from suspend.

- USB 2.0:
1.Code consolidation
2. Fixed an issue with Intel x58 chipset based platform. Before the fix as long as there is a re-enumeration to the hub due to suspend/resume or warmboot the usb 2.0 hub sometimes disappears.

  It is highly recommended to always use the most recent driver version available.

Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.

Related VIA Labs Drivers