Ubiquiti EdgeSwitch ES-48-LITE Switch Firmware 1.7.0 Download

Posted at November 2, 2024 by PCI-DB Team

Ubiquiti EdgeSwitch ES-48-LITE Switch Firmware 1.7.0 Description

New features:

- Add MAC-based VLANs, the feature allow incoming untagged packets to be assigned to a VLAN based on the source MAC address of the packet. This type of VLAN is useful when a host might not always connect to the network through the same port but needs to be on the same VLAN. This can be done in the Web UI "Switching > MAC Based VLAN > Status" page or using the CLI.

Bug fixes and enhancements:

- [System] rx errors count.
- [DHCP client] add hostname in dhcp request.
- [Dot1x] automatic VLAN assign in mac-based mode with MAB.
- [SNMP mib] remove PBR mibs support.
- [hostname] host name can't be shown after configuration on 1.6.
- [ubnt discovery] Fix firmware version string reported by discover protocol.
- [DHCP6 client] avoid config change due to dhcpv6 server has option 42.
- [DHCP snooping] avoid config change when dynamic client update in dhcp snooping.
- [System] avoid the incorrect temp value when temp sensor report 367 degree.
- [LAG] Port speed setting for LAG member ports is not preserved.
- [Web UI] Edit DNS server print some "invalid FamilyType" debug messages.
- [Web UI] Inconsistent "Current Active" firmware in GUI.
- [Web UI] VLAN Wizard overwrites tagged/untagged ports when adding range over existing VLAN.
- [Web UI] make a simplified config page for add a pool in dhcp server.

About Switch Firmware:

Given the large variety of models and different methods for upgrading the switch, if you wish to apply this package, we recommend that you read and understand the installation steps before you install a new firmware, even if you are a power user.

Usually the update procedure isn’t much of a hassle as manufacturers try to make it as simple as possible; however, there are cases that are exceptions to this rule. First off, go to the system information page of the switch to check that the currently installed version isn’t either newer or matching this release.

Applying a new firmware can decrease the security vulnerabilities, enhance overall performance and compatibility, improve various power management functions, resolve different errors, and add support for newly developed technologies and protocols.

It is recommended that you perform this step in a steady power environment such as the one ensured by a UPS unit, and that you don’t interrupt the upgrade in any way, because this might cause the switch to malfunction.

That being said, click the download button, get and apply the new version, and check back with our website constantly to stay up to speed with the latest releases. 

  It is highly recommended to always use the most recent driver version available.

Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.

Related Ubiquiti Drivers