Hauppauge HD PVR Rocket TV Tuner Firmware Updater 3.1.1.35.48 Download

Posted at April 26, 2024 by PCI-DB Team

Hauppauge HD PVR Rocket TV Tuner Firmware Updater 3.1.1.35.48 Description

Features and improvements:

- Adds support for recording stand alone from video sources without audio (such as medical devices)
- Adds support for HDMI video and LineIn audio (for use with the Hauppauge Chat Cable) Note: After upgrade, the Rocket needs to be power cycled to complete firmware upgrade: the Rocket USB cable must be unplugged and replugged. Note: You need to use Hauppauge Capture to set the input combination to HDMI video and LineIN audio. This setting will be remembered in standalone mode.
- There are no file size limits for recordings with NTFS formatted USB thumb drives. For example, if you insert a 16GB NTFS formatted USB thumb drive, you can record about 8 hours of video in one file
- Rocket recordings are now compatible with the VLC media player
- Audio processing improvements (your recordings will sound better)
- Fixes flashing on some TV sets
- This version now supports HDCP management. HDCP detection is disabled by default (this will ensure Xbox One game play can be recorded). To turn HDCP detect ON, PUSH and HOLD the record button for 5 seconds. The red record ring will flash twice. To turn HDCP detect back OFF, PUSH and HOLD the record button for 5 seconds and the red record ring will flash once. Note: in either mode, you still cannot record HDMI video protected with HDCP.

To upgrade your firmware:

- Click the Download button above and save to your PC.
- Connect your Rocket to your PC using the BLACK USB power cable.
- Run the downloaded file.
- Click Install and the firmware upgrade will begin. Your Rocket will blink for a few seconds and then the firmware update will be complete
- Click Finish

About TV Tuner Firmware:

Firmware updates for TV tuners are very important when it comes to keeping your device running at maximum efficiency. These updates contain a multitude of bug fixes, resolve compatibility issues and can even add new and exciting features to your device.

TV tuner firmware updates generally contain bug fixes, the most common of which are synchronization issues between the audio and video signal, and compatibility for countries that use different encoding formats such as PAL, NTSC and SECAM.

These updates usually come in the form of an installer which checks the currently installed firmware and applies the update in case your version is out-of-date. Although this process only takes a few minutes, you should keep in mind that disconnecting the tuner from the PC could result in an incomplete update that may cause your device to malfunction.

If you are confident that this is the appropriate firmware for your device and operating system, hit the download button, follow the installation instructions and enjoy your newly updated TV Tuner.

For more downloads, check out our website which is constantly updated with the latest in software and drivers.

  It is highly recommended to always use the most recent driver version available.

Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.

Related Hauppauge Drivers