Seagate ST3640530AS SATA Drive Firmware SD1A Download

Posted at December 22, 2024 by PCI-DB Team

Seagate ST3640530AS SATA Drive Firmware SD1A Description

Firmware Update Utility Instructions:

- Choose from the list of languages. In this example, when the application restarts in DOS, the language will be in English.
- At the Welcome screen, be sure to inspect the title, which gives a description of what products and firmware versions are supported by this package
- The next screen contains an important warning to remind you to backup your system.
- The End User License Agreement appears. Read it and select Next.
- Very important instructions and warnings display. DO NOT run this firmware update on RAID systems and DO NOT turn the power off during the firmware update procedure.
- Please read them and select Proceed.
- At this point, Windows will shut down and your system will reboot. You will see a new boot message "Seagate Loading". Do not interrupt this procedure.
- These are the first screens you will see after the reboot. DO NOT interrupt this procedure.
- The SeaTools Express utility will scan your system for hard disk drives and display the Model Number, Serial Number and current Firmware Revision for each drive.
- The firmware update utility loads the new firmware on your Seagate disk drive. This process can take a few minutes. Once the firmware update is complete, the utility will exit and reboot your system. If the utility cannot automatically reboot your system, you must reboot the system yourself.

About HDD Firmware:

Updating the HDD’s (Hard Disk Drive) firmware version can fix various problems that might occur, enhance some of the features available or add support for new ones, and improve the unit’s overall performance.

However, as this task can be very risky, applying a different firmware is recommended only when the newer version specifically resolves an issue that bothers you, or brings about changes that you can make full use of.

In addition to that, make sure you perform this task only in a steady power environment (such as the one ensured by a UPS unit).

As for the update process, due to the wide variety of HDDs and various methods provided by each manufacturer for installing a new firmware, it would be best if you carefully read and understand the installation steps.

About HDD Firmware Updater:

The Hard Disk Drive (HDD) firmware updater is an update utility that properly recognizes the HDD unit(s) installed on your system. It also displays various pieces of information regarding the connected storage devices and searches for a new suitable firmware version.

When it comes to installing this software, the steps are very easy because all you have to do is get the downloadable package (extract it if necessary) and run the available setup. Once the installation is complete, run the Toolbox and follow the instructions for updating the HDD.

That being said, make sure this Toolbox version has a new firmware version available for your drive and, if so, hit the download button, and install the software. Otherwise, check with our website as often as possible so that you don’t miss the release that can improve your HDD. 

  It is highly recommended to always use the most recent driver version available.

Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.

Related Seagate Drivers