Posted at December 25, 2024 by PCI-DB Team
Install Driver AutomaticallyDevice Name | NETGEAR UTM25 Firewall Firmware 3.6.1-20 |
---|---|
Category | Router Switch Access Point |
Manufacturer | NETGEAR |
File Size | 118.4 MB |
Supported OS | OS Independent |
- Extend logging time on ReadyNAS (The UTM can now store up to 2 years of logs on ReadyNAS)
- New ReadyNAS addon for ReadyNAS OS 6.x (x86 platform)
- Add the capability to download and read UTM release notes directly from the UTM GUI
- Removed the extra step previously required to register the IPS & application control license
- Removed the license backdating in the event that a license renewed after it had already expired.
- Added the ability to reset the admin password and also the ability to query the LAN settings by CLI command
- Change HTTPS remote management settings from enabled by default to disabled by default.
- All the registered maintenance license keys (including the expired maintenance license keys) will be extended to the end of 2016. The new maintenance license registration will be extended to the end of 2016. Customers will not be able to stack subscriptions beyond 12/31/2016. Any subscription that extends beyond that date will be adjusted to finish on that date.
- Note: ReadyNAS add-on 2.x & firmware compatibility – The ReadyNAS add-on 2.x only works with firmware version V3.6.1-18 and above and vice versa. The previous RN add-on release is 1.x.
- Fixed bug where Scanning Compatibility Mode doesn't turn off automatically
- Fixed the bug where the UTM150 NAT loopback did not work
- Fixed the bug where Internet access stopped while the UTM9S was copying files across VLANs with QoS enabled
- Fixed the issue where the UTM150 would lose its Secondary WAN address after reboot
- Fixed issue where no traffic would pass through the IPsec VPN tunnel when AES-256 and SHA2-256 are used at the same time.
- Fixed issue on the UTM150 where the web GUI will be unavailable intermittently
- Fixed issue on the UTM9S where the password for a newly created user could not be changed.
- Fixed issue where a statically configured IPOA WAN IP address would change to the UTM’s LAN IP address upon reboot
- Fixed issue where the user could not change any settings in the Attack Check menu.
- Fixed issue where QoS cannot select a VLAN on the DSL interface on UTM9S/UTM25S
- Fixed the issue on the UTM25S where the Ike policy would lose the local IP address after WAN3 (slot-1) restarts
- Fixed issue on the UTM50 where in certain cases the Firewall rules could not be changed
- Fixed issue on UTM150 where after loading a custom configuration file, the device loses its IKE and VPN policies
- Fixed issue where a second VPN policy would not be bound to an IKE policy that has already been bound to another VPN policy.
- Fixed issue where outbound email would not send with a Google Mail account when IMAPS scanning is enabled on the UTM
- Fixed issue where the Google Safe Search option was not properly removed from exception list on the GUI
- Fixed the issue where Google Safe Search did not function correctly
- Fixed issue on UTM10 when bandwidth profile is enabled, a LAN PC cannot access the server on the WAN side
- Fixed issue with SIP where certain VoIP phone could call in and out, but no voice data would come through
- Fixed DNS Lookup not working in certain cases on the UTM50
- Fixed issue where the UTM9S can't establish an Internet connection after Firmware upgrade
- Fixed issue where the Internet would be unusable if both WANs are using PPPoE
- Fixed issue where the Traffic Meter page shows error "Unable to process request. Unrecognized command." Under certain conditions
- MTU on WAN interface shouldn't be allowed
- A user with Guest privileges is able to establish/drop an IPsec VPN tunnel.
- A user with Guest privileges is able to perform operations on the WAN status page
- The Guest user is able to change the password after login from the default portal link.
- A user with Guest privileges is not automatically logged out after the admin changes the guest password
- "Deny Login from WAN interface" option is unchecked by default for custom guest user in login policies page.
- UTM is not broadcasting its connected VLAN interface routes
- Able to add two routes for the same destination with two different gateways in Load Balancing
It is highly recommended to always use the most recent driver version available.
Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.
Device Type: Network Card File Size: 24.9 MB Windows XP ,Windows Vista ,Windows XP 64 bit ,Windows Vista 64 bit ,Windows 7 ,Windows 7 64 bit ,Windows 8 ,Windows 8 64 bit ,Windows 8.1 ,Windows 8.1
Install DriverDevice Type: Router Switch Access Point File Size: 14.7 MB OS Independent
Install DriverDevice Type: Firmware File Size: 7.4 MB Windows 9X ,Windows ME ,Windows NT ,Windows 2K ,Windows XP ,Windows 2003 ,Windows Vista ,Windows XP 64 bit ,Windows 2008 ,Windows Vista 64 bit ,Window
Install DriverDevice Type: Firmware File Size: 18.9 MB Windows 9X ,Windows ME ,Windows NT ,Windows 2K ,Windows XP ,Windows 2003 ,Windows Vista ,Windows XP 64 bit ,Windows 2008 ,Windows Vista 64 bit ,Window
Install DriverDevice Type: Router Switch Access Point File Size: 30.9 MB OS Independent
Install DriverDevice Type: Router Switch Access Point File Size: 30.9 MB OS Independent
Install DriverDevice Type: Router Switch Access Point File Size: 14.7 MB OS Independent
Install DriverDevice Type: Router Switch Access Point File Size: 26.3 MB OS Independent
Install DriverDevice Type: Network Card File Size: 20.2 MB Windows 9X ,Windows ME ,Windows NT ,Windows 2K ,Windows XP ,Windows 2003 ,Windows Vista ,Windows XP 64 bit ,Windows 2008 ,Windows Vista 64 bit ,Window
Install DriverDevice Type: Router Switch Access Point File Size: 14.7 MB OS Independent
Install DriverFind Missing Drivers
Recent Devices
Recent Drivers
© 2024 PCI-DB.com - PCI Database Replacement. All rights reserved.