ZyXEL NWA5121-N Access Point Firmware 4.10(AAIF.1)C0 Download

Posted at December 22, 2024 by PCI-DB Team

Install Driver Automatically

Device Name	ZyXEL NWA5121-N Access Point Firmware 4.10(AAIF.1)C0
Category	Router Switch Access Point
Manufacturer	Zyxel
File Size	12.7 MB
Supported OS	OS Independent

ZyXEL NWA5121-N Access Point Firmware 4.10(AAIF.1)C0 Description

Fixes:
- Enhance CAPWAP mechanism when doing negotiation.
- Remove (512 / 768) Certificates Key Len option from GUI.
- Enhanced DCS (Dynamic Channel Selection) algorithm for better accuracy.
- WAS: DCS Sensitivity Level is configurable on GUI.
- Remove the”Disable-Channel Switch for DFS” from GUI.
- The Signal Strength of Station Info display old format.
- The Output Power display of Radio Profile is enhanced.
- Standalone mode AP now supports external Web Help.
- Move “Poll Interval” related item from top to Port Statistics Table.
- NAW5121-N’s GUI can’t show some info of Radio list and station info.
- When change DUT from Standalone mode to Managed mode, the GUI will pop up a warning message but it will let user misunderstand.
- In Monitor mode, "More Information" button should be gray-out in Radio List page.
- Enable "Reset counters after sending report successfully checkbox, counters will not be reset after ending Email Daily Report.
- After Click "reset all counters” button then send Email Daily Report, but counters not reset.
- When sets Radius Server and enable 802.1x then apply it and edit it later, the radius server setting is gray out.
- In GUI Monitor Profile page, 5G available channels do not contain 165.
- When upgrade firmware by GUI method, there isn’t firmware upgrading page on GUI
- NAW5121-N’s GUI can’t show some info of Radio list and station info.
- When change DUT from Standalone mode to Managed mode, the GUI will pop up a warning message but it will let user misunderstand.
- In Monitor mode, more information should be gray-out in Radio List page.
- Enable (Reset counters after sending report successfully) checkbox, in second time Emaily report sent, but counters not reset.
- After Click (reset all counters) button then send emaily daily report, but counters not reset.
- When sets Radius Server and enable 802.1x then apply it and edit it later, the radius server setting is gray out.
- In GUI Monitor Profile page, 5G available channels do not contain 165.
- When upgrade firmware by GUI method, there isn’t firmware upgrading page on GUI

  It is highly recommended to always use the most recent driver version available.

Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.

Related Zyxel Drivers