MSI 880GMA-E35 (FX) Renesas USB 3.0 Driver 2.0.34.0 Download

Posted at December 3, 2024 by PCI-DB Team

MSI 880GMA-E35 (FX) Renesas USB 3.0 Driver 2.0.34.0 Description

Specifications: 

CPU
• 64bit AMD FX, Phenom II X6/X4/X3/X2, Athlon II X4/X3/X2 and Sempron CPU.
Please refer to CPU Support for compatible CPU; the above description is for reference only.

Hyper Transport Bus
• HyperTransport 3.0 supporting speed up to 5200MT/s

Chipset
• AMD 880G and SB850 Chipset
 
Main Memory
• Supports two unbuffered DIMM of 1.5 Volt DDR3 800/1066/1333 DRAM, 16GB Max
 
Slots
• 1 PCI Express x16 slot with x16 operation (PCI Express Bus SPEC V2.0 compliant)
• 1 PCI EXpress x1 slot
• 1 PCI slot, support 3.3V/ 5V PCI bus Interface.
 
On-Board SATA
• 6 SATA 6Gb/s (1~6) ports by AMD SB850
- Supports storage and data transfers at up to 6Gb/s

RAID Function
- SATA 1~6 support RAID 0, 1, 10 or JBOD mode by AMD SB850
MSI Reminds You...
• The RAID setup floppy disk is optional depending on the districts. You can download the files from the website to make the setup disk.

USB 3.0
• 2 USB 3.0 ports by NEC D720200
 
Audio
• Chipset integrated by Realtek ALC887
- Flexible 7.1-channel audio with jack sensing
- Compliant with Azalia 1.0 Spec
 
LAN
• Realtek PCI-E GbLAN controller RTL8111E
- Supports 10Mb/s, 100Mb/s and 1000Mb/s
- Compliance with PCI-Express Bus specification v1.0a
 
Internal I/O Connectors
- 1 x ATX 24-pin power connector
- 1 x ATX 4-pin 12V CPU power connector
- CPU x 1 / System x 1 FAN connectors
- 1 x Front panel audio connector
- 1 x Front panel connector
- 1 x Chassis intrusion switch connector
- 3 x USB 2.0 connectors
- 6 x Serial ATA III connectors
- 1 x Serial port connector
- 1 x Clear CMOS jumper
- 1 x SPDIF-out  connector
- 1 x TPM module connector
 
Back Panel I/O Ports
- 1 x PS/2 keyboard or mouse port
- 4 x USB 2.0 ports
- 2 x USB 3.0 ports
- 1 x Graphic Card port
- 1 x DVI-D port
- 1 x HDMI port
- 1 x RJ45 LAN jack
- 1 x 6 in 1 audio jack
 
Dimension
• 24.4cm(L) x 20.5cm(W) Micro-ATX Form Factor
Try to set a system restore point before installing a device driver. This will help if you installed a wrong driver. Problems can arise when your hardware device is too old or not supported any longer.

  It is highly recommended to always use the most recent driver version available.

Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.

Related Renesas Drivers