ZyXEL NXC2500 Wireless Controller Firmware 4.10(AAIG.1)C0 Download

Posted at December 26, 2024 by PCI-DB Team

ZyXEL NXC2500 Wireless Controller Firmware 4.10(AAIG.1)C0 Description

Wireless LAN Controller Features and Enhancements:

- Support new Wireless LAN Controller NXC5500.
- Support IPv6 DHCP client.
- Support MyZyXEL.com 2.0. (NXC5500 only)
- Enlarge maximum managed WTP number to 64 for NXC2500.
- Enlarge maximum managed WTP number to 512 for NXC5500.
- Enlarge maximum RADIO & SSID Profile number to 128 for NXC2500.
- Enlarge maximum RADIO & SSID Profile number to 1024 for NXC5500.
- Support new managed AP NWA5301-NJ.
- Support VLAN configuration for NWA5301-NJ in controller side.
- Support Data Tunneling. (NWA5160N/NWA5550-N/NWA5560-N)
- Support Real Time Location System.
- Support Auto Healing.
- Support ZyMesh.
- Support AP Policy.
- Support Scheduling AC F/W Upgrade.
- Support Band Select.
- Support new DCS (Dynamic Channel Selection) mechanism, also support one-click button to trigger channel selection instantly.
- Support Firewall.
- Support SNMPv3.
- Support Rate Limit in per-SSID basis.
- Support Rogue AP Containment.

Wireless LAN Controller Resolved Issues:

- Edit NetBIOS name in AP profile without reboot, the setting will not take effect.
- Daylight Saving Function setting displays wrong information.
- Do firmware update on GUI, there should be a pop-up message to notify admin.
- After clicking "reset all counters" button then send Email daily report, counters are still not reset.
- Enable "Reset counters after sending report successfully" checkbox in Email daily report, then send Email report, counters are still not reset.
- When add "User" type user to the maximum value and then add user again, it will pop up "Admin user have reached the Maximum number", here the wording "Admin" should be "User type".
- When Layer-2 Isolation Profile setting change from enable to disable in SSID Profile, Intra-BSS Traffic blocking should be still enable.
- Some link of Embedded Web Help has no content or linked to incorrect page.
- The calendar in guest manager is not displayed properly on IE10 + Windows 8.
- NXC2500 is unable to do RADIUS auth when using computer name.
- The 802.1X may not work properly if AAA Server is set as FQDN.

Access Point Features and Enhancements:

- Support new Access Point NWA5301-NJ.
- Support external On-line Web Help.(On standalone AP only)
- Support Loop Guard Detection. (NWA5301-NJ only)
- Support IPv6 DHCP Client.
- Support WDS (Wireless Distributed System).
- Support SNMPv3.
- Enhanced LED behavior to help users know some critical status such as firmware upgrade. If SYS LED blinks quickly, never shutdown device.
- Support new DCS (Dynamic Channel Selection) mechanism, also support one-click button to trigger channel selection instantly.

Access Point Resolved Issues:

- When upgrading firmware by GUI, the "firmware upgrading" page is not displayed.
- When setting Radius Server and enable 802.1x in security profile, then apply it and edit it later, the radius server setting is gray out.
- After clicking "reset all counters" button then send Email daily report, counters are still not reset.
- Enable "Reset counters after sending report successfully" checkbox in Email daily report, then send Email report, counters are still not reset.
- If SSID name has character ”,” ，once we click "More Information" of Radio List in AP Information, GUI will pop up an error.
- In Monitor mode, "More Information" should be gray-out in Radio List page.
- When change device from Standalone mode to Managed mode, GUI will pop up a misleading warning message.
- Remove 512 bits and 768 bits Certificates Key Len option from GUI.

  It is highly recommended to always use the most recent driver version available.

Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.

Related Zyxel Drivers