PCI-DB.com
  1. Driver
  2. Router Switch Access Point
  3. NETGEAR DG834v4 Modem Firmware 5.03.14 WW

NETGEAR DG834v4 Modem Firmware 5.03.14 WW Download

Posted at May 31, 2025 by PCI-DB Team

Install Driver Automatically
Device NameNETGEAR DG834v4 Modem Firmware 5.03.14 WW
CategoryRouter Switch Access Point
ManufacturerNETGEAR
File Size3.6 MB
Supported OSOS Independent

NETGEAR DG834v4 Modem Firmware 5.03.14 WW Description

Fixes:

- Added support for Internet Group Management Protocol version 2 (IGMPv2) a communications protocol used to manage the membership of Internet Protocol multicast groups. IGMPv2 is used by IP hosts and adjacent multicast routers to establish multicast group memberships. IGMPv2 can be used for online streaming video and gaming, and allows more efficient use of resources when supporting these uses.
- Added support for Link Layer Topology Discovery (LLTD) which is a licensed data link layer protocol for network topology discovery and quality of service diagnostics, developed by Microsoft as part of their Windows Rally set of technologies. The LLTD protocol operates over both wired as well as wireless networks.
- Added support for Automatic Daylight Savings time. To enable Auto DST check Enable Automatic Daylight Savings Time Adjustment on the Schedule page. 
- Fixed a problem with DSL autodetection in Ireland.
- Fixed a problem where Remote Management from "Everyone" would not work.
- Fixed a problem where if WAN is IPoA, MTU cannot be changed.
- Fixed a problem where AOL Instant Messaging or Yahoo Instant Messaging could work even when Close IM Ports was checked on the Firewall Rules page.
- Fixed a problem where the device stopped routing packets between LAN and WAN side when Remote Management was enabled and the IP Address List option was used (with one or more IP address defined).
- Fixed a problem where Wireless Distribution System (WDS) repeater function interoperated with another test device only when language was set to English, but not when set to Italian.




  It is highly recommended to always use the most recent driver version available.

Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.

Related NETGEAR Drivers

NETGEAR WNA1100 WiFi Adapter Firmware 2.2.0.1

Device Type: Network Card File Size: 24.9 MB Windows XP ,Windows Vista ,Windows XP 64 bit ,Windows Vista 64 bit ,Windows 7 ,Windows 7 64 bit ,Windows 8 ,Windows 8 64 bit ,Windows 8.1 ,Windows 8.1

Install Driver

Netgear WG511v2 Driver 3.1

Device Type: Network Card File Size: 20.2 MB Windows 9X ,Windows ME ,Windows NT ,Windows 2K ,Windows XP ,Windows 2003 ,Windows Vista ,Windows XP 64 bit ,Windows 2008 ,Windows Vista 64 bit ,Window

Install Driver

Netgear DGFV338 Firmware 302-20

Device Type: Firmware File Size: 7.4 MB Windows 9X ,Windows ME ,Windows NT ,Windows 2K ,Windows XP ,Windows 2003 ,Windows Vista ,Windows XP 64 bit ,Windows 2008 ,Windows Vista 64 bit ,Window

Install Driver

Netgear MP101 Firmware 1.3.5

Device Type: Firmware File Size: 18.9 MB Windows 9X ,Windows ME ,Windows NT ,Windows 2K ,Windows XP ,Windows 2003 ,Windows Vista ,Windows XP 64 bit ,Windows 2008 ,Windows Vista 64 bit ,Window

Install Driver

Find Missing Drivers

© 2025 PCI-DB.com - PCI Database Replacement. All rights reserved.