NETGEAR WNR834Bv2 Router Firmware 2.0.8 NA Download

Posted at December 19, 2024 by PCI-DB Team

Install Driver Automatically

Device Name	NETGEAR WNR834Bv2 Router Firmware 2.0.8 NA
Category	Router Switch Access Point
Manufacturer	NETGEAR
File Size	3.2 MB
Supported OS	OS Independent

NETGEAR WNR834Bv2 Router Firmware 2.0.8 NA Description

Fixes:
- Fixed - Smart Wizard 3.0: Router incorrectly reported WAN PPPoE connection type as DHCP to setup CD.
- Fixed - Smart Wizard 3.0: Router does not disable WPS if user chooses WEP encryption from CD
- Fixed - Setup Wizard cannot detect PPPoE connection if router is configured as PPTP mode first
- Fixed - Setup Wizard cannot detect PPTP connection if router is configured as PPPoE mode.
- Fixed: Reserved IP table blank device name causes displayed improper issue.
- Fixed: Incorrect timestamp format in email log report.
- Fixed the “Refresh” function of QoS GUI page: remove disconnected LAN / WLAN clients from MAC table when “Refresh” is pressed.
- Block multicast / broadcast MAC address input in QoS page.
- Fixed blank state wizard cannot display special characters correctly.
- Fix some Port triggering GUI issues
- Block invalid subnet mask for LAN IP setup
- Block invalid MAC address in Wireless ACL list
- Improved WAN -> LAN throughput when LAN port QoS rule is enabled.
- Changed Router Status page display: if WAN is Static IP and WAN link is down, show IP address, subnet mask, etc as 0.0.0.0.
- Fix block services add-delete-reboot issue
- Fixed Mozilla Firefox browser cannot perform “Add WPS client” issue.
- Fix Port Triggering GUI errors
- Block invalid PPTP gateway IP address
- Block invalid characters in DHCP server “Reserved IP” device name
- Block invalid DHCP pool table range
- Block invalid IP address / range in “Block Service” page
- Fix WAN-LAN conflict does not change block service, port trigger automatically, etc issue
- Fix Static Route page error issue
- Fix incorrect DDNS status if host name is too long
- Fix DDNS update twice at system boot up and cause some DNS org deny the registering.
- Fix NAT: Router treats TCP UPnP port mapping as TCP/UDP.
- Fix NAT: old NAT v2.5.0.44 causes some port conflict issues.
- Fix NAT: Port triggering range can not be triggered correctly
- Fix NAT: The source port has not been mapped to the same port
- Fix NAT: Port forwarding can work before reboot DUT when detects existed ALG session.
- Fix NAT: Router can't deal with conflict Remote Management and port triggering service.
- Fix NAT: SIP MESSAGE with XML body issue.
- Fix NAT: LAN to LAN drop packet didn't release memory, causing memory leak.
- Fix NAT: Deny table protection (drop packet with source IP 0.0.0.0). it will cause router hang.
- Fixed DHCP client maximum packet size issue (SeedNet issue)
- Removed Beacon “selectedRegistrar” flag in default WPS unconfigured state (for WPS certification test case 4.1.5)
- Fixed Remote management cannot work issue
- Fixed Block site log does not match Router Spec format.
- Fixed some WPS GUI errors and warning messages.
- Fixed WPS proxy function sometimes do not work.
- Fix some SSID input will cause router GUI to crash
- Fixed Block Service GUI: add/del many times would cause WAN traffic block
- Fixed DHCP server reserved IP does not work if there are more than 30 entries
- Fixed incorrect default WAN MAC shown in “Basic Settings” GUI page.
- Fixed email buffer overflow problem.
- Fixed incorrect DDNS log when DynDNS server returns error.
- Fixed DDNS client update too many times issue.
- Fix bug that when LAN-WAN conflict occurs, LAN IP address won't change to different subnet if original IP address is not 192.168.1.1 or 10.0.0.1.
- Fix Emule cannot add a UDP port mapping through UPnP issue.
- Fixed UPnP cannot handle Unicode device name issue.
- Fix NAT: DoS Protection issue: when the SPI Firewall is disabled, the router should respond to all the ICMP echo requested from the Internet if the "Respond to Ping on Internet Port" option is enabled. The current implementation always blocks the Internet ping packets when there is bunch of such traffic from the Internet.
- Fix NAT: NETGEAR beta user reported that running Trillian (MSN, Yahoo, ICQ, AIM compatible messenger) with AIM account login will cause some many logs of [LAN access from remote].
- Fix NAT: NETGEAR beta user reported that running Trillian (MSN, Yahoo, ICQ, AIM compatible messenger) with AIM account login will cause some many logs of [DOS attack: UDP Port Scan].
- Fix NAT: Port Forwarding cannot add up 20 rules
- Fix NAT: When outbound TCP flags=0, NAT didn't drop it and let it forward to WAN side without modifying source IP
- Fix NAT: DoS Log: For a TCP session, if the router receives an Internet inbound packet belonging to this session after the TCP session is finished (i.e. FIN exchanged), the router will take such packets as attacking packets. However, those packets are just out of order packets caused by the Internet characteristics
- Fix NAT: Too many UDP port scan attack logs when closing PPlive P2P program.
- Fix NAT: When SPI firewall disabled by user, the general ftp or PPTP didn't work

  It is highly recommended to always use the most recent driver version available.

Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.

Related NETGEAR Drivers