Cisco 7985G IP Phone SCCP Firmware 1.4.7 Download

Posted at November 23, 2024 by PCI-DB Team

Cisco 7985G IP Phone SCCP Firmware 1.4.7 Description

Specifications:

Performance:
- Up to 768 kbps IP

Video standards:
- H.261, H.263, H.263+, and H.264

Frame rates
- 30 frames per second (fps) using H.263 when using 256 kbps (or more) for video
- 30 fps using H.264 when using 128 kbps (or more) for video

Native National Television Standards Committee (NTSC) standards
- 4SIF (704 x 480 pixels); receive only
- SIF (352 x 240 pixels)

Native Phase Alternating Line (PAL) standards
- 4CIF (704 x 576 pixels); digital clarity
- QCIF (176 x 144 pixels)
- SQCIF (128 x 96 pixels)

Native PC receive resolutions
- XGA (1024 x 768 pixels)
- SVGA (800 x 600 pixels)
- VGA (640 x 480 pixels)

Audio standards
- G.711, G.722, and G.729AB

Audio features
- Echo cancellation
- Automatic gain control (AGC)
- Automatic noise reduction

Camera
- One-fourth-inch charge-coupled device (CCD)
- +10 to -10° degrees tilt
- 32° vertical field of view
- 36° total vertical field of view
- 45° horizontal field of view
- 48° total horizontal field of view
- 460 (PAL) or 470 (NTSC) TV lines
- Minimum illumination 1.1 Lux (video output 50%, AGC on, and standard lens) and Reference 0.4 Lux (video output 50%, AGC on, and F1.4)
- Manual focus
- Automatic white balance

  It is highly recommended to always use the most recent driver version available.

Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.

Related Cisco Drivers