Cisco SPA525G IP Phone Firmware 7.5.5 Download

Posted at November 23, 2024 by PCI-DB Team

Cisco SPA525G IP Phone Firmware 7.5.5 Description

Fixes:

- BLF key acts as a Blind Transfer key, if the phone already has a holding call, and one of the BLF monitoring buttons is ringing.
- The phone becomes unresponsive while performing an LDAP directory search in Broadsoft Environment.
- The phone reboots while performing a search in Broadsoft Enterprise Directory when the server is unavailable.
- Users cannot use a semi-colon in the report rule as semicolon is used as the delimiter for configuration report rule and status report rule. NOTE Use space as the delimiter
- Increase the SIP account password parameter to a maximum of 64 characters.
- In Hebrew mode, the phone web GUI display changes to RTL in English.
- When a call is not answered, the call does not connect to the voice mail if no ringtone is selected. Added a parameter, <Silent Ring Duration> to control the duration of the silent ring.
- When parameter <User Equal Phone> is enabled, the headers; FROM, TO, and the request line of all the SIP messages during a call will be attached with a “user=phone” parameter.
- In SPCP mode, softkey displays incorrect French labels.
- A typo in the phone Web GUI; in the Call Audio Recording section, "Record Beep Reminder" is missing an "n".
- The ring volume is not saved by using the softkey SAVE for ring volume.
- During a call pickup event, the phone should not update the remote party CallerID when the Remote-Party-ID or PAssert- Identity header is not provided in the SIP re-INVITE message.
- A parameter, <Use Line Keys For BLF List> is needed to use the line keys first for Broadsoft BLF list feature. Previously, the phone used only side-car keys for Broadsoft BLF list feature.
- In Hebrew mode, when the user edits the personal address book, the editing cursor moves to the opposite direction of the button pressed.
- When the phone in an active call initiates another call, the corresponding BLF button blinks red as if the phone is ringing.
- The SIP TCP session gets reconnected on wrong ports upon TCP connection failure when the TCP Port values for Min. and Max. are the same.
- When 500DS is connected to a factory reset SPA 525, the phone reboots with "PRESS and HOLD" speed-dial setup.
- When the call park slot is configured on button 31 and 32 of the sidecar, the SPA525G2 phone becomes unresponsive.
- When the SPA525G2 phones attached to side cars (SPA500S/DS) are taken off hook or while talking to other users, a crackling sound is produced.
- The phone becomes unresponsive while displaying JPEG image with CMYK color space.
- In SPCP mode, the SPA525G phone stays in reboot loop when the parameter, Encryption-Key-Code is provisioned.
- To facilitate the connection between the SPA525G2 and iPhone 5/iPhone 3GS, the user has to manually reconnect the bluetooth via the settings on the mobile phone.. when iPhone 5/iPhone 3GS is connected to SPA525G2 with latest firmware version via bluetooth.
- When SPA525G2 is connected to iPhone 3GS version 6.1.3., the SPA525G2 phone does not respond to button-5 press or “EndCall” softkey press if the bluetooth connection is unstable.

  It is highly recommended to always use the most recent driver version available.

Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.

Related Cisco Drivers