Snom 821 IP Phone Firmware 8.7.4.8 Beta Download

Posted at November 24, 2024 by PCI-DB Team

Snom 821 IP Phone Firmware 8.7.4.8 Beta Description

Fixes:

- MWI Indication beeps strange in idle
- G729ab not working on 3xx, 820, 710
- Directory Ring tones not working as expected
- First DTMF tone is missing during hold when using speaker (snom 710 only)
- One way audio with g729 codec after selecting one conference participant, pressing OK and then resuming the conference
- Phone sends 711u codec on blind transfer to IMS mobile
- Muted connected call get unmuted when another incoming call stops ringing
- If DTMF keys are pressed very fast in a call, the remote phone sometimes didn't recognize the outband DTMF events correct
- Phone stops receiving multicast after receiving an incoming call via handset
- Multicast paging receive delays audio around 3 seconds when changing audio device
- Dial tone being played and transfer message blocking screen for some seconds after a successful blind transfer
- Wireless headset doesn't work properly, audio is played via handset instead of headset and call is disconnected by pressing the headset button twice
- Incoming Call while automatic redial on busy results in ringing tone restart every second
- Pickup_indication not working any longer
- Broadsoft: (Call Center Hold Reminder) Speaker is not ringer device for second incoming call
- Resolved Arabic font issues
- Enabling Wifi Ethernet Bridge leads to phone being stuck in sending DHCP requests
- DHCP - PA1 identifies itself as Snom300 (Vendor Class Identifier)
- DHCP Lease renewal: Phone does not reboot if NACK from server
- UaCSTA doesn't report redirection when PBX only uses ASSERTED-header to inform the phone
- Presence stops working after the SIP proxy is down
- Extension monitoring on expansion module causing delays and the phone to become unresponsive or slow
- Hold fails because of different DTMF paylod types 101 <-> 96
- 302 Moved Temporarily during call
- Park Service is shown as connected number for forked calls with the same number
- Wrong destination port is used for voice mail if the registrar is not using the default port 5060
- PUBLISH contains a body in refresh requests
- g729 codec choice incorrectly includes annexb=no in SDP
- If registrar is set to use a different port (e.g user_host = 192.168.1.1:6050), the port is used for registration, but not for INVITEs
- Phone loses registration on Astimax
- Phone does not reboot when a uaCSTA session is the only active call
- Phone does not register due to ignored expires header on OpenSips
- Display freezes after provisioning failed (snom 320 only)
- Snom 870 XML idle screen flickers every second after a conversation
- Goto_monitor_state_on_line_activity not working as expected in ring group scenario
- Unable to initiate attended transfer if multiple identities are involved
- P-Asserted-Identity number part isn't recorded in call history
- Dialling number out of call list entry detail view not possible any longer
- Selected ring tone not highlighted in phone menu
- User mode not applied after change from admin mode to user mode and cold restart of the phone
- Status Info screen not being displayed if key is overwritten with dkey_fkey4
- Editing internal directory entries via phone menu not possible
- Unknown instead of callerID being displayed on incoming call after hold
- Phone reboots on Logoff User via phone menu
- Edit number before call feature is broken
- Really slow responsiveness of the phone after having done several calls
- Cannot open details of missed call in Status Information by pressing OK key
- Can't activate call forwarding on 2nd identity via Menu -> Call Features -> Call Forwarding
- Cannot scroll in phone menu and after a while the phone restarts (snom Meeting Point only)
- Phone restarts after dialling a number out of missed call list accessed from Status Information
- Group Call Pickup via Call Monitor not working
- Cannot access Time Zone, Tone Scheme and Language when logon wizard is active
- LDAP number attributes are not applicable for ldap_display_name
- Switching account details for a SIP identity that first didn't have an outbound proxy to one that does, will fail to send the unregister to the correct IP
- Phone always adds <-- active identity to the name of a number when a contact without a name is added to the directory
- Spelling mistake in download parameter mapping in WUI
- IP for Extension Monitoring Call Pickup List URI is not added automatically in the SUBSCRIBE packet
- P-Asserted-Identify information are not being removed from contact.htm
- Using attribute complete="true" in tbook provisioning leads to changing some settings like languages, date format
- TR-069 GetParameterValues RPC handling is broken for generic parameters
- dkey_fkey doesn't work for URL action
- SnomIPPhoneDirectory: the last entry item is highlighted instead of the first one
- Replacement of {index} in action URLs not working any longer

New Features:

- Implementation of dtmf_volume setting for all phone types
- New setting dtmf_handset_phone to disable DTMF tones during call initiation in handset mode
- Support for Line Flash DTMF event
- End all calls tied to an identity on deactivation
- UaCSTA doesn't report when sip-TO-header differs from the local identity for an incoming call
- Phone supports partial lookups using the last n digits of a number for incoming and outgoing calls
- Default value for setting always_show_active_call changed to on since this the expected behaviour in most scenarios
- 870 UI Changes according Spec for all Non-Idle Screens
- Transfer successful message not shown by default any longer. The behaviour can be changed via new setting seconds_to_show_transfer_success_for
- Support for Line Flash DTMF event. New codec names available in codec_priority_list: telephone-event-no-fmtp: no fmtp attribute is offered in SDP telephone-event-0-16: fmtp 0-16 is offered in SDP, which enables the use of DTMF line flash
- Phone models snom 3xx, 820 and 710 are now supporting codec strings g729-annexb=yes and g729-no-fmtp in codec_priority_list
- Moved setting publish_presence from Advanced/SIP/RTP to Identity/SIP

  It is highly recommended to always use the most recent driver version available.

Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.

Related Snom Drivers