NETGEAR GSM7228S Switch Firmware 10.0.0.43 Download

Posted at December 19, 2024 by PCI-DB Team

Install Driver Automatically

Device Name	NETGEAR GSM7228S Switch Firmware 10.0.0.43
Category	Firmware
Manufacturer	NETGEAR
File Size	15.9 MB
Supported OS	OS Independent

NETGEAR GSM7228S Switch Firmware 10.0.0.43 Description

Fixes:
- GSM73xxSv2h1 doesn't show the RPS status correctly using RPS5412
- Even if the user "logs out" using the "LOGOUT" button, the file can be downloaded
- Unable to apply the configure file to the switch after copy it from USB sticker
- GSM7352Sv2 - Stacking issues on 2 stacks. Getting ACK errors and failure to receive response
- GSM7328Sv2h2 - Can get only some trafic tru after the defaut route's host moved
- GUI: Stack with 8 members lead to mirror page malfunction
- GSM7352Sv2h2 - management access-list default allow seems to be only for TCP
- Duplicate MAC applied to IPSG same interface and VLAN cause GUI error
- Cannot change VLAN 2's name
- Vendor id is incorrect for radius commands authorization
- Mac Authentication Bypass Problem
- Switch rebooted itself when setting up a customer site.
- GSM7352Sv2h2 - 10 GB Link does not work after ACG761 plugged
- OSPF LSA vulnerability -- invalid LSA erases neighboring route tables
- Flow control became inactive after reboot in slave M5300 units
- 10G LAG is down after both DUTs reboot on M5300-28GF3
- GSM7328Sv2 -DHCP Manual mode is not working in 10.0.0.31
- Stack master restarts intermittently - Port Mirror
- Fiber port doesn't link up with ASUS switch using AGM731F with auto-negotiation
- GSM7352Sv2 - GSM Stack reports wrong temperature
- GSM7252PS - Random switches reset for no reason
- M5300-52G crash at emWeb
- Change the default setting of Auto-VoIP from enable to disable
- Unable to participate include/exclude to VLAN 2 after change voice VLAN to other VLANID
- The Function Cable test changes the Port speed
- GSM7352Sv2h2 - Getting MVR error when trying to add VLAN acceptframe VLANonly to LAG
- GSM7352Sv2h2 - Getting MVR error when trying to add VLAN acceptframe VLAN only to LAG
- Power LED is blinking after 'clear configure'
- "VLAN participation include" command is lost when migrating from the image version - 10.0.0.31 to 10.0.0.42

  It is highly recommended to always use the most recent driver version available.

Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.

Related NETGEAR Drivers