ECS A785GM-M5 (V1.0) ATI Display Driver 8.631 for Vista/Win7 Download
Posted at November 23, 2024 by PCI-DB Team
Install Driver Automatically| Device Name | ECS A785GM-M5 (V1.0) ATI Display Driver 8.631 for Vista/Win7 |
|---|
| Category | Graphics Board |
|---|
| Manufacturer | ATI |
|---|
| File Size | 106 MB |
|---|
| Supported OS | Windows Vista ,Windows Vista 64 bit ,Windows 7 ,Windows 7 64 bit |
|---|
ECS A785GM-M5 (V1.0) ATI Display Driver 8.631 for Vista/Win7 Description
CPU
- Socket AM3 socket for AMD Phenom II processors
- Socket AM2+ socket for AMD Phenom II / Phenom / Athlon FX / Athlon / Sempron processors
- Support 95W Phenom II X6 processors
- High-performance HyperTransport 3.0 CPU Interface
- Support transfer rate up to 5200 mega-transfers per second
Note: This board supports CPU up to 95W TDP only; you can refer to AMD website to check your CPU.
CHIPSET
- AMD 785G & AMD SB710
- North Bridge: AMD 785G
- South Bridge: AMD SB710
GRAPHICS
- On Chip (AMD 785G-based with ATI Radeon HD4200 graphics)
- Integrated DirectX10.1 graphics processor
- Share Memory: Maximum up to 512MB
MEMORY
- Dual-channel DDR2 1066 memory architecture
- 2 x 240-pin DDR2 DIMM socket support up to 16 GB*
- Support DDR2 1066/800/667/533/400 DDR2 SDRAM *
EXPANSION SLOT
- 1 x PCI Express x16 Gen2.0 slot
- 1 x PCI Express x1 slot
- 2 x PCI slots
STORAGE
- Support by AMD SB710
• 2 x Ultra DMA133/100/66 devices
• 6 x Serial ATA 3.0Gb/s devices
• RAID0, RAID1, RAID10 configuration
AUDIO
- VIA VT1705 6-channel audio CODEC
- Compliant with HD audio specification
LAN
- Atheros AR8131 Gigabit Fast Ethernet Controller (AR8132 10/100 Lan optional)
REAR PANEL I/O
- 1 x PS/2 keyboard & PS/2 mouse connectors
- 1 x D-sub(VGA)
- 1 x DVI Port
- 1 x Serial port (COM1)
- 1 x RJ45 LAN connector
- 1 x Audio port (Line-in, Line-out, Mic-in)
- 4 x USB 2.0 Ports
INTERNAL I/O CONNECTORS & HEADERS
- 1 x 24-pin ATX Power Supply connector
- 1 x 4-pin 12V Connector
- 1 x 4-pin CPU_FAN connector
- 1 x 3-pin SYS_FAN connector
- 1 x IDE connector
- 1 x Speaker header
- 1 x Front panel switch/LED header
- 1 x Front panel audio header
- 1 x SPDIF out header
- 1 x CD in header
- 6 x Serial ATA 3Gb/s connectors
- 1 x Parallel Header
- 2 x USB 2.0 headers support additional 4 USB 2.0 Ports
- 1 x Chassis intrusion header
SYSTEM BIOS
- AMI BIOS with 8Mb SPI Flash ROM
- Supports Plug and Play, STR (S3) / STD (S4) , Hardware monitor, Multi Boot
- Supports CPU FSB adjustment, increase of 1MHz
- Supports ACPI & DMI
- Audio, LAN, can be disabled in BIOS
- F11 hot key for boot up devices option
- Support Page Up clear CMOS Hotkey
- Supports ACPI 3.0 revision
FORM FACTOR
- Micro-ATX Size, 244mm*210mm
Try to set a system restore point before installing a device driver. This will help if you installed a wrong driver. Problems can arise when your hardware device is too old or not supported any longer. It is highly recommended to always use the most recent driver version available.
Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.
Related ATI Drivers