NETGEAR FS728TLP Switch Firmware 1.0.1.20 Download

Posted at December 19, 2024 by PCI-DB Team

NETGEAR FS728TLP Switch Firmware 1.0.1.20 Description

New Features and Enhancements:

- Improved security to prevent unauthorized access through web browser.
- Using the Download Link below, download and extract the new firmware to a convenient place such as your desktop. The filename after extracting is FS728TLP_F526Tv2_V1.0.1.20.rom

Firmware Upgrade procedures by using web browser:

- Download the compressed FS728TLP_FS526Tv2_FW_V1.0.1.20_and_MIB.zip onto your local PC.
- Decompress FS728TLP_FS526Tv2_FW_V1.0.1.20_and_MIB.zip to get FS728TLP_F526Tv2_V1.0.1.20.rom.
- Launch a web browser.
- In the browser address field, type the switch’s IP address.
- After the login dialog displays, enter the password of the switch and then click LOGIN.
- Click Maintenance.
- Click Download.
- Click HTTP File Download.
- From the File Type menu, select Code.
- From the Image Name, select the image to which you want to download the new firmware file: Image 1 or Image 2.
- Click the Browser button to select FS728TLP_F526Tv2_V1.0.1.20.rom.
- Click APPLY.
- It takes 3~5 minutes to finish upgrading firmware.
- Warning: Do not interrupt the network connection while in progress. Do not disconnect the Ethernet cable or power off the unit until the process is complete.

About Switch Firmware:

Given the large variety of models and different methods for upgrading the switch, if you wish to apply this package, we recommend that you read and understand the installation steps before you install a new firmware, even if you are a power user.

Usually the update procedure isn’t much of a hassle as manufacturers try to make it as simple as possible; however, there are cases that are exceptions to this rule. First off, go to the system information page of the switch to check that the currently installed version isn’t either newer or matching this release.

Applying a new firmware can decrease the security vulnerabilities, enhance overall performance and compatibility, improve various power management functions, resolve different errors, and add support for newly developed technologies and protocols.

It is recommended that you perform this step in a steady power environment such as the one ensured by a UPS unit, and that you don’t interrupt the upgrade in any way, because this might cause the switch to malfunction.

That being said, click the download button, get and apply the new version, and check back with our website constantly to stay up to speed with the latest releases.

  It is highly recommended to always use the most recent driver version available.

Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.

Related NETGEAR Drivers