PCI-DB.com
  1. Driver
  2. Router Switch Access Point
  3. NETGEAR DGN2200v4 Modem Firmware 1.0.0.82 WW

NETGEAR DGN2200v4 Modem Firmware 1.0.0.82 WW Download

Posted at December 27, 2024 by PCI-DB Team

Install Driver Automatically
Device NameNETGEAR DGN2200v4 Modem Firmware 1.0.0.82 WW
CategoryRouter Switch Access Point
ManufacturerNETGEAR
File Size13.3 MB
Supported OSOS Independent

NETGEAR DGN2200v4 Modem Firmware 1.0.0.82 WW Description

Bug Fixes:

- Fixed the password disclosure vulnerabilities via the administrative web panel.
- Fixed the issue where in AP mode ,the release button in connection status page ,it should be grey or out of operation.
- Fixed the issue when in Ubuntu, run the security script after setting a fixed IP ,the output result contains all LAN PC IP and WPA Key.
- Fixed the issue where in AP mode ,through the link( in attached device) user can operate this function after clicking on access control.
- Fixed the issue where the configuratioin page shows incorrect password and is blank.

To Upgrade:

- Note: To avoid wireless disconnect issue during the firmware download process, NETGEAR recommends that firmware upgrade be performed on a computer with wired connection.
 - Download and extract the new firmware to a convenient place such as your desktop.
- Using a browser, login to the router as admin.
- Under Maintenance click Router Upgrade.
- Click Browse and locate the upgrade (.chk) firmware file you just downloaded
- Click Upload. Wait for the upgrade progress bar to complete and final prompt to appear.

About Router Firmware:

Before you consider downloading this firmware, go to the system information page of the router and make sure that the currently installed version isn’t either newer or matching this release.

Due to the large variety of router models and different methods for upgrading the device, it is highly recommended that you read and, above all, understand the installation steps before you apply the new firmware, even if you are a power user.

In theory, these steps shouldn’t be much of a hassle for anyone, because manufacturers try to make them as easy as possible, even if they don’t always succeed. Basically, you must upload the new firmware to the router through its administration page and allow it to upgrade.

If you install a new version, you can expect increased security levels, different vulnerability issues to be resolved, improved overall performance and transfer speeds, enhanced compatibility with other devices, added support for newly developed technologies, as well as several other changes.

If you’re looking for certain safety measures, remember that it would be best if you perform the upload using an Ethernet cable rather than a wireless connection, which can be interrupted easily. Also, make sure you don’t power off the router or use its buttons during the installation, if you wish avoid any malfunctions.

If this firmware meets your current needs, get the desired version and apply it to your router unit; if not, check with our website as often as possible so that you don’t miss the update that will improve your device. 

  It is highly recommended to always use the most recent driver version available.

Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.

Related NETGEAR Drivers

Netgear WG511v2 Driver 3.1

Device Type: Network Card File Size: 20.2 MB Windows 9X ,Windows ME ,Windows NT ,Windows 2K ,Windows XP ,Windows 2003 ,Windows Vista ,Windows XP 64 bit ,Windows 2008 ,Windows Vista 64 bit ,Window

Install Driver

Netgear MP101 Firmware 1.3.5

Device Type: Firmware File Size: 18.9 MB Windows 9X ,Windows ME ,Windows NT ,Windows 2K ,Windows XP ,Windows 2003 ,Windows Vista ,Windows XP 64 bit ,Windows 2008 ,Windows Vista 64 bit ,Window

Install Driver

Netgear DGFV338 Firmware 302-20

Device Type: Firmware File Size: 7.4 MB Windows 9X ,Windows ME ,Windows NT ,Windows 2K ,Windows XP ,Windows 2003 ,Windows Vista ,Windows XP 64 bit ,Windows 2008 ,Windows Vista 64 bit ,Window

Install Driver

NETGEAR WNA1100 WiFi Adapter Firmware 2.2.0.1

Device Type: Network Card File Size: 24.9 MB Windows XP ,Windows Vista ,Windows XP 64 bit ,Windows Vista 64 bit ,Windows 7 ,Windows 7 64 bit ,Windows 8 ,Windows 8 64 bit ,Windows 8.1 ,Windows 8.1

Install Driver

Find Missing Drivers

© 2024 PCI-DB.com - PCI Database Replacement. All rights reserved.