ZyXEL ARMOR X1 (WAP6806) Router Firmware 1.00(ABAL.5)C0 Download

Posted at April 28, 2024 by PCI-DB Team

ZyXEL ARMOR X1 (WAP6806) Router Firmware 1.00(ABAL.5)C0 Description

Modifications:

- Change product photo and for brand 2.0.
- Add GUI indicator when settings are applying and processing.
- Add LED indication - After kernel ready and WAP6806 should start DHCP “GET IP from DHCP server” and the LED Blinking GREEN for 1min 30 sec. (i). If WAP receive OneConnect provisioning message from router within the 1 min 30 sec, then WAP shall change to (OneConnect configuration synchronizing and ready) and the LED Flash RED / GREEN / RED / GREEN…for 25 seconds and then Steady GREEN as final stage (ii). If WAP does not receive OneConnect provisioning message from router within the 1 min 30 sec, then Steady GREEN as final stage

The following is the firmware upgrade procedure:

1. If user did not backup the configuration file before firmware upgrade, please follow the procedures below:
- Use Browser to login into device as administrator.
- Click Maintenance > Configuration File > Backup to save the current configuration file (config.cfg) of your system to your computer.
- Find firmware in a file that (usually) uses the system model name with the .bin extension”
- Click Maintenance > Firmware Upgrade to open the Firmware Package screen. Browser to the location of firmware package and then click Upload. The device automatically reboots after a successful upload.
- After several minutes, the system is successfully upgraded to newest version.

About Router Firmware:

Before you consider downloading this firmware, go to the system information page of the router and make sure that the currently installed version isn’t either newer or matching this release.

Due to the large variety of router models and different methods for upgrading the device, it is highly recommended that you read and, above all, understand the installation steps before you apply the new firmware, even if you are a power user.

In theory, these steps shouldn’t be much of a hassle for anyone, because manufacturers try to make them as easy as possible, even if they don’t always succeed. Basically, you must upload the new firmware to the router through its administration page and allow it to upgrade.

If you install a new version, you can expect increased security levels, different vulnerability issues to be resolved, improved overall performance and transfer speeds, enhanced compatibility with other devices, added support for newly developed technologies, as well as several other changes.

If you’re looking for certain safety measures, remember that it would be best if you perform the upload using an Ethernet cable rather than a wireless connection, which can be interrupted easily. Also, make sure you don’t power off the router or use its buttons during the installation, if you wish avoid any malfunctions.

If this firmware meets your current needs, get the desired version and apply it to your router unit; if not, check with our website as often as possible so that you don’t miss the update that will improve your device. 

  It is highly recommended to always use the most recent driver version available.

Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.

Related Zyxel Drivers