Microsemi Adaptec RAID 8885 Controller Firmware/BIOS 7.10.0 Build 33083 Download

Posted at November 25, 2024 by PCI-DB Team

Install Driver Automatically

Device Name	Microsemi Adaptec RAID 8885 Controller Firmware/BIOS 7.10.0 Build 33083
Category	Firmware
Manufacturer	Other
File Size	4.3 MB
Supported OS	OS Independent

Microsemi Adaptec RAID 8885 Controller Firmware/BIOS 7.10.0 Build 33083 Description

The controller firmware can be flashed using maxView Storage Manager or ARCCONF command line utility (once installed on an existing system or via the bootUSB utility prior to operating system installation).

Firmware:

- Resolved an issue where the controller would ASSERT if a drive that originally failed out of a RAID 1 was re-inserted while the rebuild was occurring to a hot-spare.
- Resolved an issue where a hot-swap RAID 5 member was exposed to the OS during rebuild.
- Resolved an issue where a drive could be set offline when a drive is hot-plugged during heavy IO.
- Resolved an issue where the parity cache log could cause a controller ASSERT. - Resolved an issue where the Extended BIOS Data Area (EBDA) was over-sized.
- Resolved a display issue with 6G devices in BIOS.
- Resolved an SSD logical drive creation issue in UEFI.
- Resolved an issue where large firmware images couldn't be updated in UEFI.

About Device Firmware:

Applying a newer firmware version than the one already installed on your unit can bring various enhancements, include workarounds for diverse problems encountered by the device, and improve or add newly developed features.

On the other hand, downgrading the firmware version can recover the device’s functionality in the event of a software update either turning up faulty or causing the unit’s overall performance to drop. However, bear in mind that applying an older firmware isn’t recommended and might not always be possible.

When it comes to the update steps, due to the large variety of devices and numerous ways for installing a new firmware, it is recommended that you carefully read and understand the upgrade steps, and consider applying a different firmware only when you have familiarized yourself with the update method.

As the installation process is most of the times quite risky, this step should be taken by users that have the ability to successfully complete the update; regular users may initiate it at their own risk. Moreover, it’s best that this task be performed in a steady power environment such as the one ensured by a UPS unit.

 Therefore, if you consider applying this release, hit the download button, take into account all the aforementioned aspects, and update the device’s firmware. Also make sure you constantly check with our website to ensure that you don’t miss a single new release.

  It is highly recommended to always use the most recent driver version available.

Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.

Related Other Drivers