Billion BiPAC 7300RA Router Firmware 1.06g-A Download

Posted at December 22, 2024 by PCI-DB Team

Billion BiPAC 7300RA Router Firmware 1.06g-A Description

Improvements:

1. MTU option supported in Basic Mode.
2. Ability to change PPP username and password via CLI.
3. Shorten the 3G keep alive timer from 3 min to 30 sec.
4. Improve USB modem upload performance.
5. Reset the whole LAN switch at the Reset_VLAN() to resolve issue whereby menu may be slower whilst using IPTV
6. Add system log for the IGMPPRoxy to allow user to know who joins/leaves the IGMP group.

Bugs Fixed:

1. Change the DNSMasq version from v2.43 to v2.40 for iPhone issue.
2. Fix the DHCP relay issue when dhcp server is on the wan side.

Installation Procedure:

- Save the downloadable package.
- Log into the router’s web user interface.
- Navigate to the firmware upgrade section of your wireless unit.
- Select the present firmware and configure your router to install this file.
- Wait as the device carries out this process.
- Reboot the unit if required.

About Router Firmware:

Before you consider downloading this firmware, go to the system information page of the router and make sure that the currently installed version isn’t either newer or matching this release.

Due to the large variety of router models and different methods for upgrading the device, it is highly recommended that you read and, above all, understand the installation steps before you apply the new firmware, even if you are a power user.

In theory, these steps shouldn’t be much of a hassle for anyone, because manufacturers try to make them as easy as possible, even if they don’t always succeed. Basically, you must upload the new firmware to the router through its administration page and allow it to upgrade.

If you install a new version, you can expect increased security levels, different vulnerability issues to be resolved, improved overall performance and transfer speeds, enhanced compatibility with other devices, added support for newly developed technologies, as well as several other changes.

If you’re looking for certain safety measures, remember that it would be best if you perform the upload using an Ethernet cable rather than a wireless connection, which can be interrupted easily. Also, make sure you don’t power off the router or use its buttons during the installation, if you wish avoid any malfunctions.

If this firmware meets your current needs, get the desired version and apply it to your router unit; if not, check with our website as often as possible so that you don’t miss the update that will improve your device.

  It is highly recommended to always use the most recent driver version available.

Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.

Related Billion Drivers