ZyXEL AMG1202-T10B Ethernet Gateway Firmware 2.00AAQP4b1_V0 Download

Posted at November 23, 2024 by PCI-DB Team

ZyXEL AMG1202-T10B Ethernet Gateway Firmware 2.00AAQP4b1_V0 Description

IMPORTANT NOTICE – PLEASE READ CAREFULLY: 

This procedure assumes the router is infected with Mirai virus and requires you to perform a reset to factory defaults to clean any unauthorised setting changes made to the device by the malware. Before starting you will need to know your broadband settings to re-configure internet access. If you do not have this information, please contact your internet service provider. It’s critical all steps are followed for this procedure to work.

Applicable Region

- Middle-East: UAE

Zyxel Firmware Upgrade Procedure

Step 1 Download the latest firmware with security fix
Step 2 Remove DSL cable from DSL port
Step 3 Reboot your router
Step 4 Reset router to factory defaults
Step 5 Firmware upgrade
a. Interconnect your PC/Laptop and router with network cable
b. Open web browser and type 192.168.1.1 (default IP)
c. Login to the router with the default username/password admin/1234; you will need to enter a new password when prompted. After login go to “Maintenance” - “Firmware Upgrade”
d. Select firmware file, which you have downloaded
e. Select firmware and click on upload.
f. Once you click on “Upload,” the router will start to upgrade the firmware and then reboot.
Step 6 Reconnect DSL cable
Step 7 Reconfigure for Internet access

About Gateway Firmware:

By applying this firmware, your gateway can receives fixes for various vulnerability issues, support for newly developed technologies, several authentication-related enhancements, as well as other changes.

However, due to the wide variety of gateway models, as well as the large number of manufacturers, in order to perform a firmware update properly, it would be best if you read and understand the installation steps of this specific model.

In addition to that, it is also recommend that this process be initiated in a steady power environment, and only when you have completely familiarized yourself with the upgrade procedure.

Bear in mind that failing to perform a successful update or interrupting the firmware installation in any way can cause serious malfunctions to the gateway, and might even render it unusable.

Therefore, if you intend to install this version, click the download button and apply it to the gateway. To stay up to date with new releases, all you have to do is check back with our website as often as possible.

  It is highly recommended to always use the most recent driver version available.

Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.

Related Zyxel Drivers