ZyXEL GS1900-16 Switch Firmware 2.20(AAHJ.0)C0 Download

Posted at June 1, 2024 by PCI-DB Team

ZyXEL GS1900-16 Switch Firmware 2.20(AAHJ.0)C0 Description

Enhanced Features:

1. [PoE] Switch will record logs when the Port is in Fault Status.
2. [PoE] Switch supports manually to configure Max Power consumption for each ports.
3. [PoE] Switch support PoE Scheduling function.

Bug Fixed:

1. eITS#160400893
[System] Syslog time stamp inconsistent with system time.
2. eITS#160301255
[LAG] LACP does not timeout in 3 seconds when using LACP “1 second” interval.
3. eITS#160401062
[Config] Cannot remove the port of link aggregation from Web Wizard.
4. eITS#160600848
[Port Security] Configure “Max MAC Entry Number” to “0” and it changes to “1” automatically after reboot.
5. eITS#160200029
[LAG] Sometimes LACP trunk will fail for 4 minutes.
6. [Vulnerability] Fix for CVE-2016-0800.

Known Issue:

1. [WebUI] Login page’s system name characters will over the border when system name is set to 64 characters.
2. [Logging] If user tries to restore an illegal configuration (unofficial), login will always show authentication fail.
3. [WebUI] System name display incorrect when using the special characters.
4. [WebUI] Some pages cannot display correct when IE 8 enable “Compatibility View Settings”. [Workaround] Upgrade IE browser to the latest version or disable “Compatibility View Settings.” 


Limitations:

1. 802.1s instances : 16
2. Guest VLAN : 1
3. Static MAC entries : 64
4. The BWM works well with UDP only.

About Switch Firmware:

Given the large variety of models and different methods for upgrading the switch, if you wish to apply this package, we recommend that you read and understand the installation steps before you install a new firmware, even if you are a power user.

Usually the update procedure isn’t much of a hassle as manufacturers try to make it as simple as possible; however, there are cases that are exceptions to this rule. First off, go to the system information page of the switch to check that the currently installed version isn’t either newer or matching this release.

Applying a new firmware can decrease the security vulnerabilities, enhance overall performance and compatibility, improve various power management functions, resolve different errors, and add support for newly developed technologies and protocols.

It is recommended that you perform this step in a steady power environment such as the one ensured by a UPS unit, and that you don’t interrupt the upgrade in any way, because this might cause the switch to malfunction.

That being said, click the download button, get and apply the new version, and check back with our website constantly to stay up to speed with the latest releases. 

  It is highly recommended to always use the most recent driver version available.

Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.

Related Zyxel Drivers