ZyXEL WRE2205 v2 Range Extender Firmware 1.00(AANK.0)C0 Download

Posted at May 1, 2024 by PCI-DB Team

ZyXEL WRE2205 v2 Range Extender Firmware 1.00(AANK.0)C0 Description

Specifications

Wireless Standard:
- 802.11 b/g/n

Wireless Transfer Rate:

- Receive: 300 Mbps
- Transmit: 300 Mbps

Wireless Security:

- 64/128 bit WEP, WPA-PSK/WPA2-PSK

Wireless Features:

- Universal repeater mode
- Wi-Fi Protected Setup (WPS)
- Wi-Fi Multimedia (WMM)
- Wireless output power management
- MAC address filtering
- Online firmware upgrade

Hardware Specifications:

- LAN: One 10/100 Mbps Ethernet RJ-45 port with auto MDI/MDIX support
- LED indicators: Signal strength
- LED indicators: Wireless
- LED indicators: Power
- LED indicators: WPS
- LED indicators: Ethernet
- Two 2 dBi internal antennas
- Button/Switch: WPS button
- Button/Switch: Power on/off switch
- Power rating: 100 V - 240 V AC 50/60 Hz
- Power consumption: 3 watt max.
- Plug type: EU type: Two pins for EU 220 V to 230 V
- Plug type: US type: Two pins for US 120 V
- Plug type: UK type: Three pins for UK 240 V

Physical Specifications:

- EU type: 46 x 79 x 73 mm (1.81" x 3.11" x 2.87")
- US type: 46 x 64 x 73 mm (1.81" x 2.51" x 2.87")
- UK type: 48 x 71 x 73 mm (1.89" x 2.79" x 2.87")
- Item weight: 85 g (0.18 lb.)
- Packing dimensions (W x D x H): 155 x 75 x 135 mm (6.10" x 2.95" x 5.31")
- Packing weight: 250 g (0.55 lb.)

  It is highly recommended to always use the most recent driver version available.

Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.

Related Zyxel Drivers