ZyXEL NWA1100-NH Access Point Firmware 2.11(AASI.0)C0 Download

Posted at November 5, 2024 by PCI-DB Team

ZyXEL NWA1100-NH Access Point Firmware 2.11(AASI.0)C0 Description

Versions:

Kernel Version : V2.6.31
Firmware version : V2.11(AASI.0)C0
BootModule Version : V1.1.4

Modifications in V211(AASI0)C0

A. New Features 
1. ZDP can be used to return the factory default.
2. Schedule Reboot.

B. GUI Enhancements
1. Can support the contains spaces (” ”) on the SSID security WPA2-PSK...
2. Can modify Location setting. 

C. Bug Fixes
1. The WLAN can’t connect to GUI by using IPv6 after Secure Access Control is select WLAN.
2. If DUT was changed IP configuration by ZON, the IPv6 will disconnect.
3. When 802.1Q was enable and enable as Native VLAN, the Secure access control cannot work.
4. When upload file using IE browser, the GUI is not redirect to error occurred page.
5. The encryption of the first sec_profile shows”TKIP” by CLI. It should be ”AES”.
6. OpenSSL Vulnerabilities. (CVE-2016-2107/2108)
7. Backup RADIUS Server can’t be used.
8. Remove SNMP protocol version setting in community section.
9. Output power cannot return to full power.
10. Fix setting default gateway IP issue.
11. Fix wireless disable issue for GUI.

The following is the firmware upgrade procedure: 

1. If user did not backup the configuration file before firmware upgrade, please follow the procedures below:
- Use Browser to login into device as administrator.
- Click Maintenance > Configuration File > Backup to save the current configuration file (config.cfg) of your system to your computer.
- Find firmware in a file that (usually) uses the system model name with the .bin extension”
- Click Maintenance > Firmware Upgrade to open the Firmware Package screen. Browser to the location of firmware package and then click Upload. The device automatically reboots after a successful upload.
- After several minutes, the system is successfully upgraded to newest version. 

About Access Point Firmware:

If you update the Access Point (AP) firmware, your device can benefit from changes that fix multiple issues encountered by wireless clients, correct different user interface problems, add various functionalities, and include support for newly developed protocols.

Before performing this task, we recommend that you read and understand all the installation steps, because there are many AP models and manufacturers available. Each producer strives to make the procedure as simple as possible, but there are cases when it’s anything but that.

It is also advisable that you apply a new access point firmware in a steady power environment (UPS unit will satisfy this need), using an Ethernet cable rather than a wireless connection. The latter can be easily interrupted.

With this in mind, if you wish to apply this version, click the download button and install the package on your access point. Remember to check back with our website as often as possible so that you don’t miss a single new release.

  It is highly recommended to always use the most recent driver version available.

Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.

Related Zyxel Drivers