ZyXEL ES3500-8PD Switch Firmware 4.00(AADF.2)C0 Download

Posted at December 22, 2024 by PCI-DB Team

Install Driver Automatically

Device Name	ZyXEL ES3500-8PD Switch Firmware 4.00(AADF.2)C0
Category	Router Switch Access Point
Manufacturer	Zyxel
File Size	3 MB
Supported OS	OS Independent

ZyXEL ES3500-8PD Switch Firmware 4.00(AADF.2)C0 Description

Fixes:
- Power off and power on the device during system reboot process, all port will be inactive in show running.
- PPPOE-IA packet waste too much mbuf header.
- Device crash when add and delete cluster members continuously, or login and logout through SSH, telnet, or FTP interface continuously.
- TCP session with FinWait2 will not timeout.
- Sometimes, timer variables overflow will cause DUT crash.
- DUT can't forward packet if enable cir, but not enable pir.
- DUT will crash after receiving fake dhcp packets if dhcp snooping is enabled.
- DUT always per port duplex link at full-duplex at any port configuration.
- POE function show maxCurrent(mA) in web page (rppoestatus.html).
- Hide Runt & Length error from UI.
- Device crash when backup huge configuration to TFTP server via SSH version 1.
- Mac authentication timeout works incorrectly, when radius-server timeout is less than mac-authentication timeout.
- IP mac move will cause the Ping process fails after do “show ip arp”.
- Memory leak due to send fault trap but not free it.
- Some string commands with blanks did not be quoted in the CLI command “show running-config”. And reload config will cause error.
- When send error packet to DUT, we can not see error count at UI(Web, CLI) after link down this port.
- When uploading firmware using ftp from in-band, and write memory 1 at the same time. Then reboot, DUT configuration will be abnormal.

  It is highly recommended to always use the most recent driver version available.

Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.

Related Zyxel Drivers