Roland A-500S Keyboard USB Driver 1.0.0 for XP Download

Posted at December 25, 2024 by PCI-DB Team

Roland A-500S Keyboard USB Driver 1.0.0 for XP Description

Installation:

- Start up Windows with all USB cables disconnected.
(except for keyboard and mouse)
- Exit all applications before you begin the installation.
- Double-click Setup.exe.
* If a "Install Program As Other User" dialog box appears, click [Cancel] to quit the installation and then perform the installation as an administrative account.
- The message "A-500S Driver will be installed on your computer. ---" will appear. Click [Next].
* If any other message appears, follow the directions of the message.
- Click [Next] to begin installation.
- If the "Software Installation" dialog box appears, click [Continue Anyway] to proceed with the installation.
- The message "Ready to install the driver. ---" will appear.
* If any other message appears, follow the directions of the message.
- Set the A-500S's ADVANCED DRIVER switch to the "ON" position.
- Use a USB cable to connect the A-500S to your computer, then power up the A-500S.
Wait until the lower right of the screen indicates "Found New Hardware" and the "Found New Hardware Wizard" appears.
* It may take some time for the "Found New Hardware Wizard" to appear.
If you are asked whether you want to connect to Windows Update, choose "No" and then click [Next].
Choose "Install the software automatically (Recommended)" and click [Next].
If the "Hardware Installation" dialog box appears, click [Continue Anyway] to proceed with the installation.
If the "Completing the Found New Hardware Wizard" appears, Click [Finish].
- When the "Installation has been completed." message appears, installation has been completed.
- Click [Close] to close the "Driver Setup" dialog box.
If the "System Setting Change" dialog box appears, click [Yes] to restart Windows.
- Refer to "Before you begin," and make the necessary settings for using the A-500S. You won't be able to use the A-500S unless you make these settings.

About Device Driver:

If you install this package, your device will be properly recognized by compatible systems, and might even benefit from new features or various bug fixes.

Please note that, even though other operating systems might also be compatible, we do not recommend you apply any software on platforms other than the specified ones. Doing so might cause the installation to crash, which could even render the device unusable.

When it comes to installing the package, the steps should not be much of a hassle because each manufacturer tries to make them as easy as possible; usually, you must make check for compatibility, get the package, run the available setup, and follow the instructions displayed on-screen.

However, due to the large number of devices out there and the various ways for applying these packages, it would be best if you refer to the installation manual first, to be sure of a successful update.

That being said, click the download button, and apply the present software on your product. Also constantly check with our website to stay up to speed with latest releases. 

  It is highly recommended to always use the most recent driver version available.

Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.

Related Roland Drivers