Xiro XPLORER V Camera Firmware 4.9.1_150827 Download

Posted at November 21, 2024 by PCI-DB Team

Install Driver Automatically

Device Name	Xiro XPLORER V Camera Firmware 4.9.1_150827
Category	Drone Helicopter Multicopter Controller
Manufacturer	Xiro
File Size	2.3 MB
Supported OS	OS Independent

Xiro XPLORER V Camera Firmware 4.9.1_150827 Description

Fixes:

- Add a procedure of repairing the darker light dot
- Change the video resolution from 1280*720 30fps to 1280*720 60fps

Upgrade of the XPLORER Gimbal:
1.  Download the files of “UG3300_PTZ_FW_1.0.0_xxxxxx.bin"
2. Open the folder of “XIROAssistant”
3. One end of the USB data wire plugs into the Micro-USB port  of the drone; (Note: Carefully plug-in);
4. The other end of it plugs into a USB port of the PC;
5. Long press the triangle switch on the top of the drone until the green light on. (The pressing time should not exceed 3 seconds, or it will be turn into shutdown state); 
6. Open the “XIROAsistant”, and then select “UPGRADE”;
7. And the sign of “USB is Connected” will display in the screen, please click “Ok”, and the system will jump into upgrade interface automatically;
8. Click “Select Firmware” at the upgrade interface, find the firmware of UG3300_PTZ_FW_1.0.0_xxxxxx.bin downloaded from the official website, and the gimbal will start to upgrade automatically;
9. Select “Finish” to log out the upgrade mode;
10. Long press the triangle switch on the top of the drone until the green light off, and the upgrading will be down after pulling out the USB data wire.

About Drone Firmware:

Applying a newer firmware version than the one already installed on your unit can bring various enhancements, include workarounds for diverse problems encountered by the device, and improve or add newly developed features.

On the other hand, downgrading the firmware version can recover the device’s functionality in the event of a software update either turning up faulty or causing the unit’s overall performance to drop. However, bear in mind that applying an older firmware isn’t recommended and might not always be possible.

When it comes to the update steps, due to the large variety of devices and numerous ways for installing a new firmware, it is recommended that you carefully read and understand the upgrade steps, and consider applying a different firmware only when you have familiarized yourself with the update method.

As the installation process is most of the times quite risky, this step should be taken by users that have the ability to successfully complete the update; regular users may initiate it at their own risk.

Therefore, if you consider applying this release, hit the download button, take into account all the aforementioned aspects, and update the device’s firmware. Also make sure you constantly check with our website to ensure that you don’t miss a single new release.

  It is highly recommended to always use the most recent driver version available.

Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.

Related Xiro Drivers