Xiro XPLORER Flight Control Firmware 1.0.0 Download

Posted at November 2, 2024 by PCI-DB Team

Xiro XPLORER Flight Control Firmware 1.0.0 Description

Fixes:

- The firmware (0710) supports the latest Follow Snap function
- It must be matched upgraded with the gimbal firmware (0521)
- The gimbal and the aircraft should be used together

How to Update the Flight Control Firmware

1. Download the flight control firmware of "UA3500_FCU_FW_1.0.0_15xxxx.bin” and "the XIRO assistant.rar"
3. Uncover the cap of the Micro-USB port from the left
4. Insert one end of USB data cable into the XPLORER’s Micro-USB port, Insert the other end of the USB data cable into the PC's USB port,
5. Press the XPLORER’s Power switch until its light on ( Tip：After the light on, you must release the switch in three seconds.), and then the XPLORER will sound "Di… Di …Di…" .
6. Open the XIRO assistant, and click the "UPGRADE"
7. A popup of “USB is connected” will display in the XIR Assistant, click “Ok ” and it will jump into the upgrade interface automatically.
8. On the upgrade interface, click the "Select firmware"，and then find the firmware "UA3500_FCU_FW_1.0.0_15xxxx.bin", and it will upgrade automatically.
9. When the upgrade is completed, click the "Finish".
10. Final, Press the XPLORER’s Power switch until its light down, and then pull out the USB data cable.

About Drone Firmware:

Applying a newer firmware version than the one already installed on your unit can bring various enhancements, include workarounds for diverse problems encountered by the device, and improve or add newly developed features.

On the other hand, downgrading the firmware version can recover the device’s functionality in the event of a software update either turning up faulty or causing the unit’s overall performance to drop. However, bear in mind that applying an older firmware isn’t recommended and might not always be possible.

When it comes to the update steps, due to the large variety of devices and numerous ways for installing a new firmware, it is recommended that you carefully read and understand the upgrade steps, and consider applying a different firmware only when you have familiarized yourself with the update method.

As the installation process is most of the times quite risky, this step should be taken by users that have the ability to successfully complete the update; regular users may initiate it at their own risk.

Therefore, if you consider applying this release, hit the download button, take into account all the aforementioned aspects, and update the device’s firmware. Also make sure you constantly check with our website to ensure that you don’t miss a single new release.

  It is highly recommended to always use the most recent driver version available.

Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.

Related Xiro Drivers