DJI Inspire 1 Drone Firmware 1.03.00.00 Download

Posted at November 17, 2024 by PCI-DB Team

DJI Inspire 1 Drone Firmware 1.03.00.00 Description

What’s New：

1. Added option to downgrade the aircraft firmware.
2. Added HD Video Conversion option in the video editor.
3. Added High Dynamic Range (HDR) shooting feature.
4. Enabled use of remote controller to shoot photos in burst mode.
5. Fixed issue of video files being damaged when aircraft is powered off during recording.
6. Added DJI SDK API support for Inspire 1.
7. Optimized transportation mode. Now allows entering transportation mode even when the gimbal is still attached to the aircraft. Transportation mode is automatically triggered when the gimbal is detached from the aircraft. Additionally, users can now immediately attach the gimbal after powering on the aircraft and exiting transportation mode.
8. Added option to enable or disable the Vision Position System.
9. Added option in Failsafe mode to land the aircraft at the current location and altitude.
10. Added option to enable or disable Low Battery RTH feature.
11. Flight controller parameters are now retained after firmware updates. 12. Support storing customized gimbal parameters.
13. Camera View now displays the DJI logo if a video output error is detected to avoid confusion with a blank screen.
14. Motors stop spinning automatically if blocked by obstacles or excessive force.
15. Support updating remote controller firmware though the DJI GO app.
16. Optimized battery life algorithm.
17. The battery will conserve extra power if it has not been calibrated for the first time.
18. Optimized battery protection mechanism.

Bug Fixes：

1. Fixed the issue of DJI GO app displays “Flight Controller Data Error” when the capacity of flight controller is full.
2. Improved the stability of the flight controller.
3. Improved the stability of the Vision Position System.
4. Fixed the issue of failing to reset GPS coordinate on the mobile device.

Notice：

1. The battery must be fully charged and then discharged to below 5% power to complete the calibration. Manually toggle the Flight Mode Switch to enter the IOC.
2. Upgrading the remote controller firmware though USB flash drive is no longer supported after this update. Users should only update their remote controller by using the DJI GO app.
3. Motors may beep and LEDs may flash during the update. This is normal as the motors will be updated following this update.
4. The battery’s charge and discharge cycles may be affected by the update as a result of the new calculation method for the battery life.
5. Even after the Vision Position System is disabled, the landing gear will still automatically lower in order to protect the gimbal when flying at low altitudes. If such action is not desired, turn off the Intelligent Landing Gear feature in the DJI GO app.
6. Gimbal will produce beeping sound to indicate the parameters saved successfully.
7. Aircraft firmware can only be downgraded to v1.2.106 or later.

Notes:

- Users are advised to update all Intelligent Flight Batteries with this All-in-One firmware.

Upgrade:

- Ensure your Micro SD card is inserted into the gimbal and has at least 100 MB of free space. Do not remove the Micro SD card from the gimbal during the firmware update.
- The firmware update process takes around 30 minutes. We recommend finding a comfortable environment to carry out the update.
- Check, in the DJI GO app, that you have the latest firmware installed before every flight.
- The firmware update requires an internet connection. Connect your mobile device to a Wi-Fi network whenever possible.
- Wait for the progress bar to reach 100% to ensure the firmware update is complete.
- The camera status indicator will blink update is in progress.
The camera status indicator will become solid green and the aircraft will sound ‘D DD’ when the update is complete.
The camera status indicator will become solid red and the aircraft will sound ‘D ’ if the update has failed.

About Drone Firmware:

Applying a newer firmware version than the one already installed on your unit can bring various enhancements, include workarounds for diverse problems encountered by the device, and improve or add newly developed features.

On the other hand, downgrading the firmware version can recover the device’s functionality in the event of a software update either turning up faulty or causing the unit’s overall performance to drop. However, bear in mind that applying an older firmware isn’t recommended and might not always be possible.

When it comes to the update steps, due to the large variety of devices and numerous ways for installing a new firmware, it is recommended that you carefully read and understand the upgrade steps, and consider applying a different firmware only when you have familiarized yourself with the update method.

As the installation process is most of the times quite risky, this step should be taken by users that have the ability to successfully complete the update; regular users may initiate it at their own risk.

Therefore, if you consider applying this release, hit the download button, take into account all the aforementioned aspects, and update the device’s firmware. Also make sure you constantly check with our website to ensure that you don’t miss a single new release. 

  It is highly recommended to always use the most recent driver version available.

Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.

Related DJI Drivers