Fluke 805 Vibration Meter Firmware 2.1.6 Download

Posted at December 22, 2024 by PCI-DB Team

Fluke 805 Vibration Meter Firmware 2.1.6 Description

Fixes:

- Support for Fluke Connect 

To upgrade the Meter:

- Download the upgrade file for the Meter by clicking the above link.
- Connect the USB cable to the PC or laptop.
- Make sure the Meter is off.
- Simultaneously push and hold Setup button and > button as you connect the other end of the USB cable to the Meter.
- The Meter boots up in the firmware upgrade mode and stays on while it is connected to the PC.
- Identify the external disk that is the Meter in an Explorer window on the computer.
- Make a copy of the upgrade file to the external disk that is the Meter.
- Right-click on the external disk and select eject.
- Disconnect the Meter from the host PC.
- Restart the Meter.

About Device Firmware:

Applying a newer firmware version than the one already installed on your unit can bring various enhancements, include workarounds for diverse problems encountered by the device, and improve or add newly developed features.

On the other hand, downgrading the firmware version can recover the device’s functionality in the event of a software update either turning up faulty or causing the unit’s overall performance to drop. However, bear in mind that applying an older firmware isn’t recommended and might not always be possible.

When it comes to the update steps, due to the large variety of devices and numerous ways for installing a new firmware, it is recommended that you carefully read and understand the upgrade steps, and consider applying a different firmware only when you have familiarized yourself with the update method.

As the installation process is most of the times quite risky, this step should be taken by users that have the ability to successfully complete the update; regular users may initiate it at their own risk. Moreover, it’s best that this task be performed in a steady power environment such as the one ensured by a UPS unit.

Therefore, if you consider applying this release, hit the download button, take into account all the aforementioned aspects, and update the device’s firmware. Also make sure you constantly check with our website to ensure that you don’t miss a single new release.

  It is highly recommended to always use the most recent driver version available.

Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.

Related Fluke Drivers