Cowon iAUDIO G2 Player Firmware 1.21 CH Download

Posted at December 23, 2024 by PCI-DB Team

Cowon iAUDIO G2 Player Firmware 1.21 CH Description

Improved Features & Fixed Bugs:

- Fixed the error that reduces playback time.
- Fixed the error of the same pattern in Suffle mode.
- Fixed the error that excludes some songs in Suffle mode.

Warning

/Caution:
- Firmware update must be performed in 'Recovery Mode' when updating from previous firmware to the latest firmware. The same rule applies to firmware downgrade when rolling back from the current firmware to an older version. 
- If not in 'Recovery mode', installation will shut down with the following error message: "Please use 'Recovery mode' to install new firmware!" 
- Before installing new firmware, existing firmware must be removed from iAUDIO G2. There are two ways to remove existing firmware from iAUDIO:
1. Control Panel -> Add/Remove programs -> Remove iAUDIO G2 [Cowon digital Audio Player]
2. Start -> Programs-> Cowon System -> Remove
- Please close all other programs during installation

Installation steps:

1. Download the latest firmware.
2. Unzip the installation file and run 'Setup.exe.'
3. Click 'Agree' -> 'Next' -> keep following steps in the installShiled wizard. 
4. After finishing installation, go to Start -> All Programs -> Cowon -> iAUDIO G2 -> 'Firmware download' to run the firmware upgrade program. The firmware upgrade program searches the device.
5. Remove the battery from your iAUDIO G2.
6. Press PLAY button on your iAUDIO G2, and keep pressing it.
7. Connect iAUDIO G2 to a PC by using a USB cable. 
8. Keep pressing PLAY button until windows begin 'New hardware found' wizard.
9. The wizard recognizes iAUDIO G2 in Recovery mode, and brings up the firmware update window on the screen.
10. Click 'Start' to begin installation. Updating firmware also format flash memory, so make sure to back up all your files before installing.
11. After finishing installation, remove iAUDIO G2 from a PC.
12. Go to Menu -> Information on your iAUDIO G2. You can check the upgraded version of firmware.

About Music Player Firmware:

In case your device has encountered various problems that this release can fix, or if the same release comes to add certain features that you can make use of, then you should definitely take into account upgrading.

Usually, to do that, you must get the downloadable file (unpack it if necessary) and transfer it to the player through any available method, and start the upgrade process from the device’s setup menu.

However, given the large variety of music players and the many ways to enter update mode, it would be best if you read the product’s installation guide and initiate this task only when you have familiarized yourself with the steps.

To apply this firmware, take into account all the aspects mentioned above, hit the download button and update your music player. In addition to that, make sure you constantly check with our website to stay “updated one minute ago.” 

  It is highly recommended to always use the most recent driver version available.

Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.

Related Cowon Drivers