Cowon PLENUE M Player Firmware 1.12 Download

Posted at November 21, 2024 by PCI-DB Team

Cowon PLENUE M Player Firmware 1.12 Description

New features

- Add a function to turn off the screen at a time when pressing the POWER button briefly.
It works only at [OFF] in [Settings/System/Locked screen]
Select [ON] to work 2 steps Lock mode
- Change the name of [Settings/System/Hold mode] to [Button lock] (All hold => Locked, Touchscreen
hold => Unlocked)
- If headphone/earphone is unplugged when the volume is higher than standard, automatically reset to
standard volume(hearing protection)
- Revise not to overlap optical-out icon with time.

Warning/Caution

- The battery must be fully charged before firmware upgrade.
- Do not reset PLENUE M during firmware upgrade.
- Backup any important files in PLENUE M to your PC before firmware upgrade.
- Please use firmware that COWON authorizes only.
- JetEffect values might be initialized after firmware upgrade. Please record any important values.

UPGRADE INSTRUCTIONS:

- After downloading the firmware file (PLENUEM_1.14.zip), unzip it (PLENUE_M_FW, PLENUE_M_FW_key).
- Turn on PLENUE M and connect it to a PC by a USB cable.
- Copy and paste the two files (PLENUE_M_FW, PLENUE_M_FW_key) to the root folder of PLENUE M.
- Right-click on the icon [Safely Remove Hardware] in the tray at the lower right corner of the screen to disconnect the device from the PC.
- First of all, please make sure PLENUE M is turned off. Then, press a power button of the device. Firmware upgrade process will be shown on the screen followed by PLENUE M's automatic turning off. Please turn on the device again. There would be two times of firmware upgrade.
- When PLENUE M turns off again after showing a 'Success' message on the screen, turn on the device again.
- Firmware version is can be checked at settings > system > information.

About Music Player Firmware:

In case your device has encountered various problems that this release can fix, or if the same release comes to add certain features that you can make use of, then you should definitely take into account upgrading.

Usually, to do that, you must get the downloadable file (unpack it if necessary) and transfer it to the player through any available method, and start the upgrade process from the device’s setup menu.

However, given the large variety of music players and the many ways to enter update mode, it would be best if you read the product’s installation guide and initiate this task only when you have familiarized yourself with the steps.

To apply this firmware, take into account all the aspects mentioned above, hit the download button and update your music player. In addition to that, make sure you constantly check with our website to stay “updated one minute ago.” 

  It is highly recommended to always use the most recent driver version available.

Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.

Related Cowon Drivers