EnGenius ECB3220 Access Point Firmware 1.43.05 Download

Posted at May 2, 2024 by PCI-DB Team

EnGenius ECB3220 Access Point Firmware 1.43.05 Description

ECB3220 - 802.11g High Power 400mW Wireless Access Point / Bridge with 802.3af PoE

HARDWARE SPECIFICATIONS:
MCU: RTL8186
Memory: 16MB SDRAM
Flash: 4MB
Physical Interface:
LAN One 10/100 Fast Ethernet RJ-45
Reset Button
Power Jack
LED’s Status:
Power (Status)
LAN (10/100Mbps)
WLAN (Wireless Connection)
Power Requirements:
Power Supply: 90 to 240VDC ± 10%, 50/60Hz (Depends on different countries)
Active Ethernet: (Power-over-Ethernet, IEEE 802.3af) 48VDC/0.375A
Device: 12V/1A
Regulation Certifications: FCC Part 15, CE

RF SPECIFICATIONS:
Frequency Band: 2.400–2.484GHz
Media Access Protocol: Carrier Sense Multiple Access with Collision Avoidance (CSMA/CA)
Modulation Technology: OFDM: BPSK, QPSK, 16-QAM, 64-QAM, DBPSK, DQPSK, CCK
Operation Channels: 11 for North America
Receive Sensitivity (Typical):
IEEE 802.11g
6Mbps @ -84dBm
54Mbps @ -70dBm
IEEE 802.11b
1Mbps @ -92dBm
11Mbps @ -84dBm
Available Transmit Power:
IEEE 802.11g
26dBm @ 6~24Mbps
24dBm @ 36Mbps
22dBm @ 48Mbps
21dBm @ 54Mbps
IEEE 802.11b
26dBm @ 1~11Mbps
Antenna: Detachable Omni Antenna; RP-TNC Type; Peak Gain 5dBi

SOFTWARE FEATURES:
Topology: Infrastructure / Ad-Hoc
Operation Mode: Access Point / Client Bridge / Repeater / Client Router
LAN: DHCP Server / DHCP Client
WAN (Client Router mode): PPPoE
Router: NAT / NAPT
VPN: VPN pass-through (PPTP, L2TP, IPSEC)
Wireless:
Wireless Mode 802.11b / 802.11g
Auto Channel Selection
Transmission Rate 802.11b/g: 54, 48, 36, 24, 18, 12, 11, 9, 6, 5.5, 2, 1 in Mbps
Security:
WEP Encryption 64/128/152bits
WPA/WPA2 Personal (WPA-PSK using TKIP or AES)
WPA/WPA2 Enterprise (WPA-EAP using TKIP)
802.1x Authenticator / Radius Client (Access Point mode)
MAC Address Filtering
Hide SSID in Beacons
User Isolation
NAT (Client Router mode)
QoS: WMM

MANAGEMENT:
Configuration: Web-Based Configuration (HTTP) / Telnet
Firmware Upgrade: Upgrade Firmware via Web Browser; Keep Latest Setting When Firmware Update
Administrator Setting: Administrator Password Change
Reset Setting: Reboot (Press 1 second) / Reset to Factory Default (Press 5 seconds)
System Monitoring: Status, Statistics and Event Log
SNMP: v1, v2c
MIB: Private MIB
Backup & Restore: Settings Through Web

ENVIRONMENT & PHYSICAL:
Temperature Range: Operation 0°C to 45°C (32°F to 113°F) / Storage -20°C to 70°C (-4°F to 158°F)
Humidity (Non-condensing): 5% ~ 95% Typical
Dimensions: L: 4.92” (125mm) x W: 4.25” (108mm) x H: 1.22” (31mm)
Weight: 0.77lb. (350g)

  It is highly recommended to always use the most recent driver version available.

Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.

Related EnGenius Drivers