CradlePoint AER2100 Router 4G Modem Firmware 5.0.0 Download

Posted at December 22, 2024 by PCI-DB Team

Install Driver Automatically

Device Name	CradlePoint AER2100 Router 4G Modem Firmware 5.0.0
Category	Router Switch Access Point
Manufacturer	CradlePoint
File Size
Supported OS	OS Independent

CradlePoint AER2100 Router 4G Modem Firmware 5.0.0 Description

Fixes:
- Update to OpenSSL version 1.0.1g to mitigate CVE-2014-0160, aka the “Heartbleed” Bug.

Added support for USB Modems:

- CradlePoint MC300LE-VZ
- CradlePoint MC300LP
- CradlePoint MC300LP-AT
- CradlePoint MC300LP2-EU

New features:

- System Settings -> Certificate Management.
- Add ability for negation on source and destination addresses in WAN Affinity was added.
- Internet / CP Secure Connect.
- CradlePoint’s cloud VPN solution has been renamed to ‘CP Secure Connect’ and has been removed from Beta status.
- CP Secure Connect also supports full tunnel VPN.
- Full tunnel support can be created by selecting the local LAN with a remote network configured as 0.0.0.0/0.
- Added additional Modem diagnostics to SNMP.
- Added client site visit reporting to the log that reports which clients accessed an external IP address.
- Active and passive DNS Failure Check added to Ethernet WAN sources to make their Failure Check options match what is provided for modems.
- Band-steering has been added.
- RADIUS timeout and retry settings have been added for Hotspot support.
- Added the ability to prioritize VOIP packets from the LAN to the WAN when using a VPN tunnel.

Additional UI/Usability changes:

- Local SSH has been enabled by default.
- Modem diagnostics. Extended, categorized and sorted modem diagnostic information on the page.
- Modem Settings, On Demand Start Connection checkbox.
- SMS interface extension. Added Help command.
- The wireless band has been added to the Wi-Fi clients list.
- An Asset Tag field has been added to the router under the Local Administration tab.
- Added ability for negation on source and destination addresses in WAN affinity.

Defects fixed:

- IE9 and IE10 UI issues when setting up VPN tunnel
- CP Secure Connect tunnel did not re-establish after reboot
- GRE failover was not working correctly in some conditions
- Clients dropped off of the Clients List and returned
- OpenDNS might have issues reconnecting after reboot, depending on the speed of the WAN reconnection
- SSH to Serial port was scrambling data

  It is highly recommended to always use the most recent driver version available.

Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.

Related CradlePoint Drivers