DrayTek VigorPhone 350 IP Phone Firmware 12202.26.1.11 Download

Posted at December 22, 2024 by PCI-DB Team

DrayTek VigorPhone 350 IP Phone Firmware 12202.26.1.11 Description

Improvements

- Fixed: Failed to re-establish a PPTP VPN connection into an IPPBX. It will cause VigorPhone 350 being unable to register to IPPBX. Therefore, a new option of VPN Redial is added under Advanced for establishing VPN.
- Fixed: Can't remove the 001* for incoming CLI for calls from the SIP trunk which register with SIP Account of Gamma.
- Fixed: After queue by the IPPBX, the user can't redial the call via missed call history.
- Fixed: One way audio problem occurred in Remote extensions via VPN.
- Fixed: When used Line3, it will fail to connect the conference call. If hang up the phone then VP350 will stop working and LCD keep lighting at this moment.
- Fixed: If a transferring call comes from Grandstream GXP1450 to VigorPhone 350 but
rejected by VigorPhone 350 rejected, the user will get no audio issue from both, then SIP
account would re-register after hanged up phone for 5~10 seconds.
- Fixed: VigorPhone 350 is unable to identify Subscription-State:
terminated;reason=timeout when changing MKey function from BLF to Speed Dial.
- Fixed: Noise appears when a call is on hold with Draytek Soft Phone.
- Fixed: Can not call transfer (does not reply 407 from IPPBX).
- Fixed: "Call pick" call is categorized to outgoing call.
- Fixed: Mute indicator disappears on display.
- Fixed: Call history error for the anonymous call.
- Fixed: Registration Server configuration issue, when type over than 31 words, that will automatic add registration ID info on this field.

Known Issues

- Upgrading VigorPhone 350 to firmware version 12202.26.1.11 will cause device configuration reset to default. Please backup the System Configuration before upgrading to 12202.26.1.11 and restore the file after the device successfully upgraded to 12202.26.1.11.
- The old configuration file (earlier than 12202.26.1.07) is not compatible with the new firmware.

Notes

- If the firmware of the device is 12202.26.1.07 or earlier, please follow the steps as below to upgrade the firmware,
Step1: 12202.26.1.07H_1FULL.img (via TFTP) (upgrade boot loader)
Step2: 12202.26.1.11_FULL.img (via TFTP) (upgrade firmware)
- If the firmware of the device is 12202.26.1.07H, please upgrade from Web directly:
Step1: 12202.26.1.11.img (via Web) (upgrade firmware)

  It is highly recommended to always use the most recent driver version available.

Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.

Related DrayTek Drivers